The Singing Machine SMI-1460 instruction manual Setup, E06, Connect the Pads and the Pedals

English

SETUP

CAUTION!

To prevent electric shock and damage to the device, make sure the power is switched OFF on the drum and all related devices before making any connection.

Connect the Pads and the Pedals

Using the provided cables, connect each trigger input jack on the rear panel of the module, and make sure each pad is connected to its corresponding trigger input jack.

NOTE

1.The sound of the hi-hat pad is controlled by the hi-hat pedal. Similar to an acoustic drum, the hi- hat pad functions as an “open hi-hat” when the pedal is released. When the pedal is depressed, it functions as a “closed hi-hat”.

2.By striking areas of the cymbal pad (ride, crash or hi-hat) near the edge of the pad, the sounds produced are different from the other pads.

ride

crash

tom 2

tom 1

hi-hat		tom 3
	snare

kick

hi-hat

control

hi-hat

output

midi out

control

hi-hat

Crash

ride

tom 3

tom 2

tom 1

Snare

kick

R

L/mono

Aux.in

dc 9v.

ON

OFF

E06