The Singing Machine SMI-1460 Play a Tone, E09, Listen to the tone, Select the tone volume

Page 9

PLAY A TONE

Listen to the tone

This drum module has a total of 50 preset tones.

Note: The preset tone setting is 001 once powered on.

1. Press [ tone / volume ] button.

The tone indicator lights and the current tone number will appear.

2.Press [ + ] or [ - ] button to select one of the tones and listen to the the Tone number 001-050, which are, preset tones.

(Reference tone list: page E14)

3.Press [ start - stop ] button and the beat indicator will flash.

The tone will start playback from the beginning.

4. The tone will stop when it reaches the end.

You can stop the tone during playback by pressing the [ start / stop ] button.

The ASSIGN pad’s indicator flashes at the first beat of each measure.

Note: The ASSIGNED pad’s indicator will not illuminate when both [ hi- hat ] and [ kick ] buttons are pressed at the same time.

Beat indicator

Beat indicator

English

Select the tone volume

1.Press the [tone/volume] button to select the volume of the tone, which will display “AXX”. XX = Level value 00 to 31

2. Press [ + ] or [ - ] button to adjust the volume of the tone accompaniment.

*Volume of the tone will not reset to default when power is ON.

Adjust the tones tempo

1.Pressing the [ tempo + ] or [ tempo - ] button will display the current tempo value.

tempo/tap

2. Press the [ tempo + ] or [ tempo - ] button to increase or decrease the tempo. The tempo value will range from 30 to 280.

- Hold down either the [ tempo + ] or [ tempo - ] button to change the setting from high to low speed.

- Pressing the [ tempo + ] and [ tempo - ] buttons at the same time will reset the tempo to the default value.

Note: Approximately 2 seconds after you stop pressing the [ tempo ] button, the display will change to your selected song or kit number instead of the tempo value.

E09

Image 9
Contents SMI-1460 E02 CongratulationsContents Panel Control E04Front Panel E05 Rear PanelSide Panel E06 SetupConnect the Pads and the Pedals Ride Crash Tom Hi-hat Snare Kick ControlE07 Set the main volume Set the power switchFunction E08Adjust the tones tempo Select the tone volumePlay a Tone E09E10 Using the lighting guide functionTap tempo function Mute a Drum partCreate a User Drum KIT Adjust the volume of the PadE11 Set a Drum voiceE12 SpecificationsE13 Voice ListTone List Drum KIT ListE14 No. NameMidi Implementation Chart Basic Default 10 chE15 F02 FélicitationF03 ContenuTableau DE Contrôle F04Tableau de contrôle avant F05 Tableau de connexion arrièreTableau de connexion sur le cotéa Installation F06Brancher les Pads et les pédales F07 F08 FunctionsJouer UNE Timbres Sélectionner le volume d’une TimbreF09 Ecouter une TimbresRégler le tempo en frappant sur un pad F10Rendre la batterie d’une chanson muette Fonction métronomeCréer UN KIT D’UTILISATEURA User Drum KIT Ajuster le volume du PADF11 Régler un son de batterieF12 Caractéristiques TechniquesListe DES Sons F13No. Name Acoustc Base Drum 001 BD head Liste DES Kits DE Batteries Liste DES TimbresF14 F15 Graphique DU Mode D’ÉXÉCUTIONS02 ¡FELICIDADESS03 ContenidoPaneles DE Control S04Panel Frontal S05 Panel PosteriorPanellateral S06 EnsambladoConectar los pads y los pedales Crash RideS07 S08 FuncionesTocar UN Timbre Ajustar el volumen de un timbreS09 Ecuchar un timbreFuncion de tap tempo S10Silenciar el acompañamiento de batería Tocar con un clicCrear Sonidos Para UNA Batería Ajustar el volumen de un padS11 Armar un grupo de sonidosS12 EspecificacionesS13 Listado DE VocesLista DE Tonos Lista DE Grupos DE BateriaS14 No. NombreS15 Implementacion Sistema MidiSinging Machine Company, Inc