Nilfisk-ALTO S-6 user manual Stereo TRS Jack Plug, Some Final Tips on Wiring Configuration

Page 13

b. Some Final Tips on Wiring Configuration

You can connect unbalanced equipment to balanced inputs and outputs. Simply follow these schematics.

Sleeve Tip

Ring=Right Signal

Ring

Strain Clamp

Tip=Left Signal

Sleeve=Ground/Screen

Use for Headphone, Stereo Return

1/4" Stereo (TRS) Jack Plug

Sleeve Tip

Strain Clamp

Tip=Signal

Sleeve=Ground/Screen

Use for Mono Line In, Mono 1/4"Jack Plugs

1/4" Mono (TS) Jack Plug

2 1

2=Hot(+)

3

1=Ground/Screen

 

 

3=Cold(-)

Use for Balanced Mic Inputs

(For unbalanced use, connect pin 1 to 3)

3-pin XLR Male Plug

(seen from soldering side)

2 1

2=Hot(+)

3

1=Ground/Screen

 

 

3=Cold(-)

Use for Main output

(For unbalanced use, leave pin 3 unconnected)

3-pin XLR Line Socket

(seen from soldering side)

12

Image 13
Contents Channel Mixing Console Important Safety Instructions Safety Related SymbolsPower Supply External ConnectionPreface Table of Contents Introduction AUX MIC/LINE channels Phantom Power +48 Volts2 MID 1 HI3 LOW PWR Track signal pathOutput Input18VAC PowerInstallation and Connection Stereo TRS Jack Plug Some Final Tips on Wiring ConfigurationAfter For the Experts WHO Want to Know MoreSystem Block Diagrams Technical Specification Warranty Registration Card Seikaku Technical Group Limited