Nilfisk-ALTO S-6 user manual Track signal path, Pwr

Page 9

4.9 MASTER section

- MAIN MIX LEVEL

11

This Control sets the amount of signal sent either to the Main Out socket or to the Tape Output.

- PHONES/CONTROL ROOM

12

This Control sets the amount of signal sent to the Control Room and headphone.

- LED METER

13

This stereo 6 segments Led Meter will indicate the level of the overall output signal.

- 2 TRACK signal path

14

If you push down the 2TK TO CONTROL ROOM button, the 2 TRACK IN signal will be routed into the Control Room output and the level will be ad- justed by the Control Room knob nearby the Main MIX LEVEL knob.

If you push down the 2TR TO MIX button, the 2 TRACK IN signal will be routed into the MAIN output and will be adjusted by the MAIN MIX LEVEL knob.

- AUX RETURN

15

It will be used to return the signal of an effect processor into the mixer but it can be also used as an additional stereo line input. This signal of the AUX RETURN is always assigned to the MAIN MIX. The Aux Return input will operate in mono if you connect an input only to the left socket.

- PHANTOM PWR

16

This switch will apply +48 Volt Phantom Power only to the 2 XLR microphone inputs. Never con -nect microphones when the Phantom Power is on already.

- PHANTOM 17

This LED indicates when the Phantom Power is switched on.

- PWR 18

This Led indicates when the Power is on in your S-6.

16

15

14

PHANTOM PWR

 

 

 

 

PHANTOM PWR

- 8

+15

 

 

AUX RETURN

 

CLIP

 

 

 

 

 

 

10

 

 

 

0

 

2TK TO

 

-4

CONTROL ROOM

 

-10

 

 

 

 

 

 

-30

 

 

L

R

2TK TO MIX

OUTPUT LEVEL

 

 

- 8

MAX

- 8

+15

PHONES /

CONTROL

MAIN MIX

ROOM

LEVEL

1211

17

18

13

8

Image 9
Contents Channel Mixing Console Important Safety Instructions Safety Related SymbolsPower Supply External ConnectionPreface Table of Contents Introduction AUX MIC/LINE channels Phantom Power +48 Volts1 HI 2 MID3 LOW PWR Track signal pathOutput Input18VAC PowerInstallation and Connection Stereo TRS Jack Plug Some Final Tips on Wiring ConfigurationAfter For the Experts WHO Want to Know MoreSystem Block Diagrams Technical Specification Warranty Registration Card Seikaku Technical Group Limited