Nilfisk-ALTO S-8 user manual Features

Page 6

2. FEATURES

Your S-8 is provided with 4 mono Line/Mic input, 1 stereo Line/Mic input and an additional stereo Line input to be used with keyboards, Midi Instruments, etc. We have even included a 2-track input/output for recording and playback. Ultra low noise microphone preamplifiers, 3 bands eq on all input channels, pre and post Auxiliary bus and phantom power complete the picture.

5 Input for Microphone and line provided with balanced 1/4" jack and XLR. Channel 5 features stereo Line input

1 additional input for Line level signal provided with balanced TRS 1/4" jacks

The Microphone preamplifiers are Ultra Low Noise and are provided with +48 Volt Phantom Power

Precise 3 bands graphic equaliser (LOW, MID and HI) on each input channel

Pre-fader and post-fader Auxiliary bus

Single Led indicating signal Peaks on each input channel

Low-cut filter on all mono MIC channels

2-track input featuring RCA sockets assignable alternatively to each output group

12 Segments Led Meter for optimum reading of the output signal

Main Output and Control Room outputs are unbalanced type

5

Image 6
Contents Channel Mixing Console Power Supply Safety Related SymbolsImportant Safety Instructions External ConnectionPreface Table of Contents Introduction Features Ready to START? Control Elements Channel Mixing ConsoleInput Level setting Mono MIC/LINE channelsLOW-CUT Filter Stereo Inputs Peak AUX SendsPAN LevelMaster Section Stereo AUX Return Track IN/OUT InputOutput AUX Send 1AC Inlet with Fuse Holder Rear Panel DescriptionPHANTOM4 Main MIX OutputInstallation and Connection Some Final Tips on Wiring Configuration Stereo TRS Jack PlugTapped Connection Direct Output Lead For the Experts WHO Want to Know More Modification on mono and stereo channelsSystem Block Diagrams Technical Specification Return Notice WarrantyWarranty Registration Card Terms and ConditionsSeikaku Technical Group Limited