Vivotek ST3402 user manual Monitor Start Up Mode

Item	Root	Power User	General
			User
Monitor Start Up	ˇ
Mode
User Management	ˇ
Playback	ˇ	ˇ
Change Password	ˇ	ˇ	ˇ
Exit	ˇ	ˇ	ˇ
Lock / Unlock	ˇ	ˇ	ˇ
Logout	ˇ	ˇ	ˇ

Table 2-1 The Privilege in Launcher

3.Monitor start up mode – The option decides the program type of Monitor that is described in section 3 after Window boot up. There are three kinds of types: Service: Do not Autorun – The Monitor will be run as a service but it will not be invoked automatically after Window boot up. Manual startup is needed.

Service: Autorun – The Monitor will be run as a service procedure and it will be invoked after Window boot up automatically without login. Recording procedure will be also invoked if proper schedule is configured. More detail about scheduler in Monitor, refer section 4.

Non-Service – The Monitor will be run as a normal procedure (non-service). User can invoke Monitor by using the interface provided by Launcher.

Figure 2-7 Monitor Start Up Mode

NOTE: When Monitor runs as service procedure, it will work in background after

2-17