Vivotek ST3402 user manual NUMPAD0

Figure 3-17 Cursor change to click on image mode

9Enable PTZ hot key －

When the option is enabled, user can control PTZ camera by using keyboard. The following table represents functionality of each hot key:

9	Hot Key	9	Functionality
9	NUMPAD_0	9	AutoFocus
9	NUMPAD_1	9	Focus -
9	NUMPAD_2	9	Down
9	NUMPAD_3	9	Focus +
9	NUMPAD_4	9	Left
9	NUMPAD_5	9	Home
9	NUMPAD_6	9	Right
9	NUMPAD_7	9	Zoom -
9	NUMPAD_8	9	Up
9	NUMPAD_9	9	Zoom +
9	NUMPAD_DIVIDE	9	Pan
9	NUMPAD_MULTIPLY	9	Stop
9	NUMPAD_SUBTRACT	9	Patrol

Table 3-2 PTZ Hot Key

9Apply to new device －

After reconnected to Network Camera or video server, if Monitor found that the server type changes, for example, the original camera is with a built-in PT len, but the connected device is a video server. This setting tells the Monitor to accept the new device and use the previous setting values (such as schedule and recording media type, …ect) For more detail, please refer to section 3.7.1.

3-37