Figure 3-35 Alert Message
If you select the check box for “Enable Motion Detect”, “Enable Digital Input” or “Enable Video loss” in the path “Configuration Menu \ Camera Configurations \ Alert Settings”, the alert message will show in the window as shown in; refer to “Alert Settings” in Section 3X.4.3.XAn alert message appears in this window when an alert is triggered by user defined motion detection or a digital input level change. You can also use the scroll bar of this box to check on the alert event’s history.
The message format is described as follows:
“time”=>”alert type” #”channel number”(“win1”,”win2”,”win3”)
The message “02:41:00=>MO #1(0,1,1)” means that this was a motion detection alert occurred at 02:41:00 AM in Motion Window 2 and Motion Window 3.
The message “14:41:56=>DI #1” means there was an alert triggered by the first DI at 02:41:56 PM.
The message format of video loss is as follows: “time”=>video loss”#”channel number
For example, “07:20:03=>Video Loss#5” means that a video loss alert occurred at 07:20:03 AM in channel 5.
3.7.2.4 Talk72BControl
Talk Control is shown as follows: