Alert sound will be played on remote side if the option is enabled, alert sound has been configured and the one of the above three alerts (motion/digital/video loss) triggered.
NOTE: Above items may be disabled when the connected server doesn’t support the features.
Recording Settings:
9Name -
If you want to specify your own location name, specify it in this field. Otherwise, leave this field with the default value “<Default>”. You will get a default location name which concatenates the string in the server’s “Text on video” field with an underline and the channel index.
9Record # secs. before event -
Once the event recording is activated (using SchedulingH)Hfor channels, you can use this setting to regulate the time for the recording of the triggered event. The recording will start at the set time before the alert event starts.
9Record # secs. after event -
This set how long the recording will last after the alert event triggered.
9Media Type -
You can use this to specify which media type you want to record, Video, Audio, or both. In some case that the connection contains only media data, the recorded data will contains only media data though the choosen recording media type is both. Similarly, if the choosen type is audio, and the connection has not audio data, nothing will be recorded.
3.4.4Changing36Bthe Camera Order in the List
You can use “drag and drop” in the grid area of the camera list to change the sequence of the connected Video Server / Network Camera series products, as
shown in FigureX3-9.XThis is helpful when you want to rearrange the cameras’ order.