Omron Healthcare HJA-301 Settings, Setting the TIME, WEIGHT, Height and Stride Length

Page 8

SETTINGS

SETTING THE TIME, WEIGHT, HEIGHT AND STRIDE LENGTH

The unit comes with the battery installed. When you use the unit for the first time or you want to change settings, follow the steps below.

For setting range details refer to “Specifications” on page 29.

NOTE:

Remove the protective film from the face of the display.

1. Press the SET button on the back	SET button
of the unit with a thin, sturdy, stick
that will not break easily.
Do not press the button with a sharp
point. This could cause damage to the
button.

The hour flashes on the display.

NOTE:

The display will turn off if no buttons are pressed after 5 minutes while setting the unit for the first time or after resetting the unit. When resetting the unit, the display will show the current step count.

Image 8

Contents Model HJA-301 Table of Contents Introduction Fill-in for future referenceDate Purchased Staple your purchase receipt hereFeatures Workout ModeActive Engine Auto Stride LengthImportant Safety Information Indicates a potentially hazardousResult in death or serious injury User or patient or damage toReplace a worn battery with a new one immediately Always remove the battery before disposing of the unitKnow Your Unit Front of the main unitBack of the main unit ComponentsSettings Setting the TIME, WEIGHT, Height and Stride LengthThat will not break easily Button Hour flashes on the displaySetting the hour Automatic stride length settingAll the settings are completed Stride Length Measurement ModePress to confirm Press to start a workoutPress for 2 seconds to end Workout Attaching the Unit When Workout Mode is onWhen Workout Mode is OFF Attaching the Unit Using the Unit Using the Workout ModeWorkout indicator bar End a workout Start a workoutPress to read the data refer to Simply bring the unit with you wherever you goWhen running Irregular movementInconsistent walking pace Excessive vertical movement or vibrationAbout the Display About the Individual DisplaysStep count/Time display Time Calories burned/Fat burned displayWorkout Mode is OFF Changing the DisplayDuring Workout Mode To stop Workout Mode, press for 2 seconds at any timeData for the previous time or previous day are displayed Time must be correctly set in the unitView the Same Display Screen for ALL Days View ALL Information for Each DAY Time is not displayed while viewing previous results900PM, 1000PM, 1100PM Battery ReplacementLow battery indicator Battery life About the Battery Saving Mode Sleep ModeFollowing examples offer a guide to expected battery life Press , or to activate the display againRemove the old battery Do not throw the battery into fire. The battery may explodeTo Delete ALL DATA/ERASE in Memory Using the System Reset FunctionTo Reset the Setup Data Care and Maintenance Clean the unit with a soft dry clothDo not use any abrasive or volatile cleaners This unit is a precision instrument. Handle it with careTroubleshooting Tips Do not operate normally Refer to Err is Malfunction hasDisplayed Occurred Refer to Specifications FCC Statement Potential for RADIO/TELEVISION Interference for U.S.A. onlyLimited Warranty Visit our web site atOmron Healthcare, Inc Distributed by

SETTINGS

SETTING THE TIME, WEIGHT, HEIGHT AND STRIDE LENGTH

that will not break easily.

button.

The hour flashes on the display.