USING THE SYSTEM RESET
FUNCTION
Use the system reset function in the following cases:
•When you want to reset the initial setup data (weight, height, clock, etc.)
•When you want to delete all data
TO RESET THE SETUP DATA:
1.Press the SET button on the back of the
unit.
The display screen shows the SETUP section, starting with a blinking clock.
NOTE:
Do not press the button with a sharp point. This could cause damage.
2.Reset the settings (refer to page 8).
TO DELETE ALL DATA/ERASE IN MEMORY:
1.Press the SET button on the back of the
unit.
NOTE:
Do not press the button with a sharp point.
This could cause damage.
2.Press 
and 
at the same time for at least 2 seconds.
After “ALL Clr” has been displayed, the hour flashes on the display.
To reset the time, weight, height and stride length, refer to “Settings” on page 8.
25