Siemens MC35 manual 35 AT+CPIN Enter PIN, +CPIN code OK, Code

AT Command Set

4.35 AT+CPIN Enter PIN

Test command	Response
AT+CPIN=?	OK
Read command	Response
AT+CPIN?	TA returns an alphanumeric string indicating whether or not a password is re-
	quired.
	+CPIN: <code> OK
	If error is related to ME functionality:
	+CME ERROR: <err>
	Parameter
	<code>
	SIM PIN authentication
	READY	PIN has already been entered. No further entry
		needed.
	SIM PIN	ME is waiting for SIM PIN1.
	SIM PUK	ME is waiting for SIM PUK1 if PIN1 was dis-
		abled after three failed attempts to enter PIN1.
	SIM PIN2	ME is waiting for PIN2, when the attempt to ac-
		cess PIN2 requiring features was acknowledged
		with +CME ERROR:17 (e.g. if client attempts to
		edit the FD phonebook).
	SIM PUK2	ME is waiting for PUK2 to unblock a disabled
		PIN2. Necessary if preceding command was ac-
		knowledged with error +CME ERROR:18.
	Phone security locks set by client or factory
	PH-SIM PIN	ME is waiting for phone-to-SIM card password if
		"PS" lock is active and user inserts other SIM
		card than the one used for the lock. ("PS" lock is
		also referred to as phone or antitheft lock).
	PH-SIM PUK	ME is waiting for Master Phone Code, if the
		above "PS" lock password was incorrectly en-
		tered three times.
	Factory set SIM locks
	PH-FSIM PIN	ME is waiting for phone-to-very-first-SIM card.
		Necessary when "PF" lock was set. When pow-
		ered up the first time, ME locks itself to the first
		SIM card put into the card holder. As a result,
		operation of the mobile is restricted to this one
		SIM card (unless the PH-FSIM PUK is used as
		described below).
	PH-FSIM PUK	ME is waiting for phone-to-very-first-SIM card
		unblocking password to be given. Necessary
		when "PF" lock is active and other than first SIM
		card is inserted.

MC35_ATC_01_V04.00 Page 101 of 238 02.04.2002