Tascam CD-01U Auto CUE Level Preset, Direct Track Search Preset, Description Remarks Data

TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications

4-10. AUTO CUE LEVEL PRESET

Sets the Auto Cue level of the controlled device.

When this command is transmitted with request data ([FF]), the controlled device returns the AUTO CUE LEVEL RETURN command [A0].

The Auto Cue function is turned on and off using the AUTO CUE SELECT command [30].

Command		20
Data		2 bytes
Return		AUTO CUE LEVEL RETURN [A0]
Data 1	Data 2	Description	Remarks
0	0	-24dB	Sets the Auto Cue detect level to –24dB.
0	1	-30dB	Sets the Auto Cue detect level to –30dB.
0	2	-36dB	Sets the Auto Cue detect level to –36dB.
0	3	-42dB	Sets the Auto Cue detect level to –42dB.
0	4	-48dB	Sets the Auto Cue detect level to –48dB.
0	5	-54dB	Sets the Auto Cue detect level to –54dB.
0	6	-60dB	Sets the Auto Cue detect level to –60dB.
0	7	-66dB	Sets the Auto Cue detect level to –66dB.
0	8	-72dB	Sets the Auto Cue detect level to –72dB.
F	F	Auto Cue level request	Requests the currently set the Auto Cue detect level.

·If the specified data is other than described above, the controlled device sends ILLEGAL [F2].

4-11. DIRECT TRACK SEARCH PRESET

Sets a track number. If the controlled device is in stop or play mode, the specified track is played back. If the controlled device is in ready mode, the unit will enter ready mode at the start of the specified track. This command is judged to be illegal if an attempt is made to jump to a non-existent track (e.g. track 11 on a 10-track disc).

Command		23
Data		4 bytes
Return		None
	Description		Remarks
Data 1	Tens digit of track number
Data 2	Units digit of track number		Track number
Data 3	Thousands digit of track number		Sample) 2300: Track 23
Data 4	Hundreds of track number

· If the specified track number does not exist on the disc, the controlled device sends ILLEGAL [F2].

10 TEAC Corporation