Mechanical Installation
Mounting Type
Clamping Type (Long Side)
LGXXXN1C(W, K)-A3
LGXXXN1C(W, K)-B3
Use four mounting holes on two opposite sides.
Clamping Range
(230mm)
270mm | 270mm |
Use four clamps on the long frame.
Clamping Type (Short Side)
Center ± 100mm
Clamping Range: From module Edge to 270mm
Center ± 100mm
Use four clamps on the short frame and two clamps at the center of long Frame.
This method is not tested by IEC/UL.
Clamping Range: From module Edge to 120mm
Use four clamps on the Short frame.
This installation is allowed in the following cases:
1.Slope roof: If module is installed parallel to the rooftop.
2.Flat roof: If installed with an additional stand such as wind shield or deflector.
7