Table
External Analog Programming 0 to 10 V (dc or ac):
Bandwidth: | 10 kHz (3 db frequency) |
Accuracy: | ± 4.5% ± 40 mA (0 to 3 A range) |
| ± 4.5% ± 130 mA (0 to 30 A range) |
| ± 0.8% ± 200 mV (0 to 60 V range) |
Temperature Coefficient: | 100 ppm/°C ± 3 mA/°C (current ranges) |
| 100 ppm/°C ± 1 mV/°C (voltage range) |
External Current Monitor (0 to 10 V): |
|
Accuracy: | ± 4% ± 40 mA (referenced to analog common) |
Temperature Coefficient: | 60 ppm/°C ± 3 mA/°C |
External Voltage Monitor (0 to 10 V): |
|
Accuracy: | ± 0.25% ± 40 mV (referenced to analog common) |
Temperature Coefficient: | 50 ppm/ °C ± 0.2 mV/ °C |
Remote Sensing: | 5 Vdc maximum between sense and input binding posts |
Maximum Input Levels: |
|
Current: | 30.6 A (programmable to lower limits) |
Voltage: | 75 V |
Minimum Operating Voltage: | 2 V (derated to 0 V at 0 A) |
PARD (20 Hz to 10 MHz noise): |
|
Current: | 2 mA rms/20 mA |
Voltage: | 5 mV rms |
DC Isolation Voltage: | ± 240 Vdc between + or - input binding post and chassis ground |
Digital Inputs: |
|
Vlo: | 0.9 V maximum at Ilo = |
Vhi | 3.15 V minimum |
Digital Outputs: |
|
Vlo: | 0.72 V maximum at Ilo = 1 mA |
Vhi: | 4.4 V minimum at Ilo - 20 μA |
SUPPLEMENTAL CHARACTERISTICS |
|
Programmable Slew Rate (For any given input transition, the time required will be either the total slew time or a minimum transition time, whichever is longer. The minimum transition time increases when operating with input currents under 1 A. The following are typical values; ±25% tolerance):
4