Agilent Technologies 60501B manual CRNG value, CURRRANG value

Table 60501-1 Specifications and Supplemental Characteristics (continued)

Source Turn-On Current Overshoot: Less than 10% of final value (in CC and CR modes when connected to power supplies with voltage rise times of greater than 500μs).

Programmable Short Circuit: 0.066 Ω (0.04 Ω typical)

Programmable Open Circuit: 20 kΩ (typical)

Drift Stability (over an 8 hour interval):
Current:	± 0.03%	± 5 mA
Voltage:	± 0.01%	± 10 mV
Reverse Current Capacity:	50 A when unit is on; 20 A when unit is off

Weight:

Function

Constant Current

Set Range

Low Range

High Range

3.2 kg (7 lbs.)

Table 60501-2. Programming Ranges

Front Panel	Front Panel	HPSL Command
Key	Display	(Short Form)
	C:RNG value	"CURR:RANG value"

Range of Values

≥0 and ≤ 3 A

> 3 A and ≤ 30 A

Set Main Level

Low Range

High Range

Set Slew Rate

Low Range

High Range

Set Transient Level

*Set Triggered Level

Constant Resistance

Set Range

Low Range

Middle Range

High Range

Set Main Level

Low Range

Middle Range

High Range

Set Slew Rate

Low Range

Middle/High Range

Set Transient Level

*Set Triggered Level

(shift)

(shift)

CURR value

C:SLW value

C:TLV value

R:RNG value

RES value

V:SLW value C:SLW value R:TLV value

"CURR value"

"CURR:SLEW value"

"CURR:TLEV value" "CURR:TRIG value"

"RES:RANG value"

"RES value"

"VOLT:SLEW value" "CURR:SLEW value"

"RES:TLEV value" "RES:TRIG value"

0 to 3 A

0 to 30 A

0.00005 to 0.25 (A/μs)

0.0005 to 2.5 (A/μs) same as main level same as main level

≥0 and ≤ 2 Ω

>2 Ω and ≤ 2 kΩ >2 kΩ and ≤ 10 kΩ

0 to 2 Ω

2 Ω to 2 kΩ

20 Ω to 10 kΩ

same as voltage slew same as current slew same as main level same as main level

Constant Voltage

Set Main Level

Set Slew Rate

Set Transient Level

*Set Triggered Level

VOLT value

(shift) V:SLW value

V:TLV value

"VOLT value"

"VOLT:SLEW value" "VOLT:TLEV value" "VOLT:TRIG value"

0 to 60 V

0.001 to 0.5 (V/μs) same as main level same as main level

6