Agilent Technologies 60501B manual Range

	Table 60501-1 Specifications and Supplemental Characteristics (continued)
Current Slew Rate:*
Rate # 30 A Range Step			3 A Range Step		Transition Time
1	0.5	A/ms	0.05	A/s	8.0 ms
2	1.2	A/ms	0.12	A/s	3.2 ms
3	2.5	A/ms	0.25	A/ms	1.6 ms
4	5 A/ms		0.5 A/ms		800 μs
5	12 A/ms		1.2 A/ms		320 μs
6	25 A/ms		2.5 A/ms		160 μs
7	0.05 A/μs		5 A/ms		80 μs
8	0.12 A/μs		12 A/ms		32 μs
9	0.25 A/μs		25 A/ms		16 μs
10	0.5	A/μs	0.05	A/μs	12 μs
11	1.2 A/μs		0.12	A/μs	12 μs
12	2.5 A/μs		0.25	A/μs	12 μs

	*AC performance specified from 3 to 60 V.
Voltage Slew Rate:
Rate # Voltage Range Step		Transition Time*
1	1 V/ms	8.0 ms
2	2.5 V/ms	3.2 ms
3	5 V/ms	1.6 ms
4	10 V/ms	800 μs
5	25 V/ms	320 μs
6	50 V/ms	160 μs
7	0.1 V/μs	85	μs
8	0.25 V/μs	85	μS
9	0.5 V/μs	85	μS

*Transition time based on low capacitance current source.

Resistance Slew Rate (2 Ω range): Uses the value programmed for voltage slew rate.

Resistance Slew Rate (2 k and 10 kΩ ranges): Uses the value programmed for current slew rate.

Transient Current Overshoot (When programmed from 0A):
Range	Transient Current Level			Current Slew Rate	Overshoot*
30 A	3-30 A	All slew rates			0
	1.5 A	0.5	A/μs to 2.5 A/μs		6%
	1.5 A	0.5	A/ms to 0.25 A/μs		0
3 A	3 A	All slew rates			0
	1.5 A	0.13		A/μs and 0.25 A/μs	3%
	1.5 A	0.05		A/ms and 0.05 A/μs	0

*Overshoot may be higher during first five seconds of programming if unit has been operating at full current. Overshoot values assume a total inductance of lμH, or less, in the load leads connected to the D.U.T.

5