JVC YU30052-513-2 Engage VCR’S RECORD-PAUSE Mode, Begin Automatic Editing, END Automatic Editing

ORIGINAL TAPE (camcorder)
	1		3	2
		IN	OUT IN OUT	IN OUT

EDITED TAPE (VCR)

EDIT STOP

35

AUTOMATIC EDITING TO VCR

ENGAGE VCR’S RECORD–PAUSE MODE

1 Point the remote control toward the VCR’s infrared sensor and press VCR REC STBY, or manually engage the VCR’s Record-Pause mode.

BEGIN AUTOMATIC EDITING

2 Press EDIT on the camcorder, and the previously selected scenes are copied to the VCR in the specified order.

END AUTOMATIC EDITING

3 When all selected scenes have been copied, the camcorder and VCR enter the still or pause mode. Press STOP on both units.

NOTES:

●If you performed step 1C on page 33, keep the remote control pointed at the VCR during editing.

●The on-screen display only appears while the camcorder searches for each scene.

●To dub a copy of the camcorder’s (source) tape, perform R.A.EDIT by specifying only one in-point (and no out-point). The contents of the tape from the specified in-point to the end of the tape are automatically copied.

●There may be noise at in- or out-points on the edited tape with certain VCRs.

SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL

Player (JVC VCR)		AV OUT
To	Editing cable
R.A.EDIT	(3.5 ø -3.5 ø,
	provided)	AV IN
	Recording deck
To
PAUSE IN
	RM-V704U
	(provided with
	GR-AX460, optional
	for GR-AX260)

Using the RM-V704U remote control, it is also possible to perform deck-to-deck Random Assemble Editing. The playback deck must be an R.A. Edit-capable JVC VCR. The recording deck can be...

■a VCR other than JVC, or

■a JVC VCR which has neither a Remote PAUSE nor an R.A. EDIT connector

How to use:

—Connect the playback deck and RM-V704U as shown on the left.

—Set the RM-V704U to correspond to the brand of the recording deck. (☞ P. 33)

—For Random Assemble Editing procedure, please refer to the instruction manual of the JVC VCR you are using as the playback deck.

Notes:

■RM-V704U cannot be used to control the playback deck.

■RM-V704U is capable of controling basic operations of the recording deck. While pressing VCR CTL, press PLAY, STOP, PAUSE, FF or REW for these functions. (Not possible with some brands and models). Other buttons cannot be used.

■To put the recording deck in the Record-Pause mode, use the controls on the recording deck itself.