JVC YU30052-513-2 Release Manual Focus Mode, Button, While holding down F1, slide the power zoom

F1 button	F2 button
F1
SEL
F2
Function SEL.	F1 FOCUS F2	EXP.
button
Power zoom switch
	Viewfinder

F1 + F1 +

21

Manual Focus

NOTE:

You should already have made the necessary viewfinder adjustments (☞ pg. 9). If you haven’t, do so before continuing.

SELECT MODE

1 Press Function SEL. until “FOCUS” appears to the right of F1.

ADJUST FOCUS

A	TO FARTHER SUBJECT
2
While holding down F1, slide the power zoom

2 switch to T. The Manual Focus indications “	”
appear and “ ” blinks.

Go to step 3.

BTO NEARER SUBJECT

While holding down F1, slide the power zoom switch to W. The Manual Focus indications

“” appear and “” blinks. Go to step 3.

LOCK FOCUS

3 Release the power zoom switch. The focus indication is replaced by the focus lock indication “” and the adjusted focus is locked in.

RELEASE MANUAL FOCUS MODE

4 Press F1. The Manual Focus mode is immediately released and the focus lock indication disappears.

NOTES:

●Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a certain subject in the wide-angle position, sharply focused images cannot be obtained when zoomed up because the depth-of-field is reduced at longer focal lengths.

●Two manual focusing speeds are available. For slow-speed, push the switch slightly and hold that position. For fast-speed, push the switch fully.

●When the focus level cannot be adjusted any farther or closer, “” or “” will blink.