34
A
C
IN OUT 
ç© 1 0:00:25 
© 2
© 3
© 4
© 5
© 6
© 7
© 8
COUNTER 0:00:25 
TOTAL 0:00:00
IN OUT 
ç© 1 0:00:25 0:01:05
© 2 0:03:18 0:03:31
© 3 0:02:33 0:02:53
© 4 0:04:11 
© 5 
© 6
© 7
© 8
COUNTER 0:04:11 
TOTAL 0:01:13
B
EDITING (cont.)

PREPARE CAMCORDER

2
Insert a recorded tape and set the power switch to
PLAY.

PREPARE VCR

3
Turn the power on, insert a recordable tape and
engage the AUX mode (refer to VCR’s instructions).

SELECT SCENES

ACCESS R.A. EDIT COUNTER

DISPLAY

1
Press PLAY/PAUSE, then press R.A. EDIT and the
counter display appears in the viewfinder and the
screen of the connected TV.

REGISTER BEGINNING OF SCENE

2
Press REW or FF to locate the beginning of a scene
you want, then press IN/OUT to register that point.
The data appears under IN on the display.

REGISTER END OF SCENE

3
Press REW or FF to locate the end of the scene and
press IN/OUT to register it. The data appears under
OUT on the display. The total time of the registered
scene(s) is displayed at the bottom of the screen.

REGISTER ADDITIONAL SCENES

4
Repeat steps 2 and 3 for each additional scene
(as many as 8).

MAKE CORRECTIONS

5
Press CANCEL during steps 2 and 3 to erase the
most recently registered point.
NOTES:
●
There must be at least one second between an in-point
and its corresponding out-point.
●
The camcorder prerolls during R.A. Edit, so there must
be at least 15 seconds of recording material prior to
any in-point.
●
Blank portions of tape cannot be registered as in-points
or out-points.
●
If it takes more than 5 minutes to search for an in-point,
the VCR’s Record-Pause mode is cancelled and editing
doesn’t take place.
●
Pressing R.A.EDIT clears all in- and out-points from
memory.
●
Leave a small margin for error around each in-point to
ensure the scene is recorded in its entirety.
CANCELREW/FF
IN/OUT
PLAY/PAUSE
STOP
R.A. EDIT
To EDIT
To AUDIO and
VIDEO out
connector
To AUDIO and
VIDEO IN
connectors
If your TV/VCR has
the SCART connector,
use the provided
cable adapter.
VCR (Recording deck)
To
Remote
PAUSE
To Pause-In
RM-V704U
(provided with
GR-AX460,
optional for
GR-AX260)
Editing cable
(provided)
Audio and Video
cable (optional)
CANCEL
IN//OUT
VCR REC STBY
ON/OFF