Enviro 25BV Operating Instructions, Lighting Instructions, For Your Safety Read Before Operating

Page 11

8.OPERATING INSTRUCTIONS

FOR YOUR SAFETY READ BEFORE OPERATING

WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION

MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

A)This appliance is equipped with a pilot, which must be lit by hand by following these instructions exactly.

B)BEFORE LIGHTING smell all around the appliance area for gas, and next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS:

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

C)Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it . Call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D)Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information above.

2.Turn off all electrical power to the appliance.

3.Turn the gas control knob clockwise to the “off’ position.

4.Open door. Wait five (5) minutes to clear out any gas. Close door. If you smell gas including near the floor, STOP! Follow “B” in the above safety information.

If you don’t smell gas go to next step.

5.Find the pilot located to the right between the front

and rear burner.

6. Turn gas control knob counter-clockwise to “PILOT”.

7.Push the gas control knob in fully and hold. Immediately light the pilot by pushing the piezo spark igniter. Keep knob depressed for about 30 seconds after pilot is lit. Release knob. If pilot

goes out, repeat steps 4 through 6.

WARNING The gas valve has a lockout device, which will not allow the pilot burner to be re-lit until the thermocouple, has cooled.

If the knob does not pop up when released, stop and immediately call your service technician or gas

supplier.

NOTE: Check to be sure the pilot flame engulfs the thermocouple and that the burners light

completely.

If the pilot will not stay lit after several tries, turn the gas control knob to “OFF" and call you service technician or gas supplier.

HI \ LO knob Control knob

8.Turn gas control knob counter-clockwise to the “ON” position.

Flip burner switch to “ON” then turn “HI / LO” knob to the desired setting.

9.Turn on all electrical power to the unit

TO TURN OFF GAS TO

APPLIANCE

1. Turn the gas control knob

clockwise to “OFF” DO NOT FORCE

2.Turn off all electrical power to the appliance if service is to be performed.

3.Flip burner switch to off.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents What to do if YOU Smell GAS For Your SafetyGeneral Safety PrecautionsFor Your Safety Table of Contents Codes and Approvals Replacement Parts IncludeVenting Dimensions and Clearances to CombustiblesAutomatic Flue GAS Spill Switch Other DimensionsVenting Fireplace Inserts Preparation for InstallationAssembling and Installing Your Envirogas Accent Assembly and Installation InstructionsElectrical Requirements Installing Remote Thermostat or Wall SwitchNatural Propane Main Burner Orifice Never USE AN Open Flame for Leak TestingInstallation of LOGS, Embers and Brick Panels What to do if YOU Smell GAS For Your Safety Read Before OperatingOperating Instructions Lighting InstructionsOpening the Door Cleaning the GlassCleaning the Inside of the Firebox Adjusting Venturi AIR SettingsNatural GAS Fuel ConversionProblem Possible Cause Solution Trouble ShootingDescription Parts and AccessoriesExploded View Accent InsertPost APR Brass Trim AccentExploded View Surround Panels Painted TrimTo the Dealer WarrantyAccent 25 BV Installation Data Sheet

25BV specifications

The Enviro 25BV is an innovative, cutting-edge solution designed for those looking to enhance energy efficiency and promote a more sustainable living environment. This versatile product is a perfect fit for both residential and commercial applications, allowing users to seamlessly integrate advanced technology into their daily lives.

One of the main features of the Enviro 25BV is its state-of-the-art energy management system. This system maximizes energy usage, ensuring that resources are utilized optimally. The smart algorithms employed by the Enviro 25BV analyze real-time data and adjust settings automatically to maintain ideal conditions, which translates to significant energy savings over time.

Another standout characteristic of the Enviro 25BV is its robust build quality. Crafted with environmentally friendly materials, the design not only prioritizes sustainability but also guarantees longevity. This durability ensures that the unit can withstand various environmental elements, further enhancing its practical applications in different settings.

The Enviro 25BV incorporates advanced filtration technologies that significantly improve indoor air quality. Equipped with a multi-stage filtration system, it effectively captures dust, allergens, and other pollutants, providing a cleaner and healthier living environment. This is particularly beneficial for individuals with respiratory issues or allergies.

Moreover, the user interface of the Enviro 25BV is designed with convenience in mind. Its intuitive controls allow users to easily adjust settings and monitor energy consumption. Additionally, compatibility with smart home systems means that users can control the unit remotely, offering an exceptional level of convenience and accessibility.

In terms of energy efficiency ratings, the Enviro 25BV exceeds industry standards, making it an ideal choice for eco-conscious consumers. Its low energy consumption not only contributes to reduced utility bills but also diminishes the overall carbon footprint, aligning with global sustainability goals.

To sum up, the Enviro 25BV stands out as a premium option that combines innovative technology with eco-friendly design. With features like an advanced energy management system, robust filtration capabilities, and user-friendly controls, it represents a substantial step forward in energy-efficient solutions. Embracing the Enviro 25BV means choosing a sustainable lifestyle that benefits both individuals and the planet.
Top Page Image Contents