Enviro 25BV owner manual Fuel Conversion, Natural GAS

Page 13

10.FUEL CONVERSION

“Warning” This conversion kit shall be installed by a qualified service technician in accordance with the manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or CO poisoning may result. The qualified service agency is responsible for the proper installation of this kit. The installation is not proper or complete until the operation of the converted appliance is checked as specified in the owner’s conversion kit.

Please read and follow these instructions. Also please read the instruction guide lines provided by S.I.T on how to remove and install the HI-LOW regulator.

STEP 1. Carefully inspect all parts supplied with this conversion kit. STEP 2. Shut the gas off and disconnect the main gas line from the unit.

STEP 3. Open the door by undoing the two screws on the bottom of the door, pull door towards you then lift up and out. Remove the logs and the burner tray from the unit, this will expose the main burner orifice and the pilot assembly

STEP 4. Change the regulator on the front of the gas valve. (Follow the instructions provided by S.I.T) STEP 5. To change the pilot orifice: First, pull the pilot head of the pilot assembly, using a 5/16” allen key

remove the pilot injector for assembly. Install the new pilot injector for the fuel being used.

(BE CAREFUL WHEN TIGHTENING THE PILOT FITTING, YOU COULD BREAK THE CERAMIC IGNITER ELECTRODE).

STEP 6. Re-install the pilot assembly in the reverse order of STEP 5. STEP 7. Remove the main burner orifice using a ½” deep socket

STEP 8. Install the new orifice supplied. Be sure to put a bead of pipe thread sealant or approved Teflon tape on the orifice before installing the orifice into the burner assembly.

STEP 9. Re-install the burner tray in unit, log set and door.

STEP 10. Reconnect the gas line to the unit. Do a leak check using a soap and water solution or an approved manner on the gas supply line and the pilot tubing.

STEP 11. Re-light the appliance to insure proper operation and proper flame appearance. Be sure to adjust the venturi setting to achieve an efficient flame in the fireplace.

STEP 12. MAKE SURE that the sticker provided by S.I.T is installed to signify that this valve has been converted to a different type of fuel. Also make sure that the rating plate has a conversion label to show that this unit has been converted to a different fuel type.

A VISUAL CHECK OF THE REGULATOR KNOB IS NECESSARY TO DETERMINE WHETHER OR NOT THE REGULATOR IS THE CORRECT PART. A 50% TURN DOWN REGULATOR WILL HAVE ONLY ONE CORNER ON THE KNOB.

 

 

CONVERSION KIT PARTS LIST

 

 

 

1

 

 

 

 

PROPANE.

50% turn down HI-LOW Regulator w 3 T-20 Torx

NATURAL GAS

screws

Pilot Orifice

.62-mm

.35-mm

1 pilot injector

Burner Orifice.

# 42 DMS

#53 DMS

1

Main orifices

 

 

 

 

1

Pilot assembly mounting gasket

Venturi Settings

1/16” open

3/8” open

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents What to do if YOU Smell GAS For Your SafetyFor Your Safety Safety PrecautionsGeneral Table of Contents Codes and Approvals Replacement Parts IncludeAutomatic Flue GAS Spill Switch Dimensions and Clearances to CombustiblesOther Dimensions VentingVenting Fireplace Inserts Preparation for InstallationAssembling and Installing Your Envirogas Accent Assembly and Installation InstructionsElectrical Requirements Installing Remote Thermostat or Wall SwitchNatural Propane Main Burner Orifice Never USE AN Open Flame for Leak TestingInstallation of LOGS, Embers and Brick Panels Operating Instructions For Your Safety Read Before OperatingLighting Instructions What to do if YOU Smell GASCleaning the Inside of the Firebox Cleaning the GlassAdjusting Venturi AIR Settings Opening the DoorNatural GAS Fuel ConversionProblem Possible Cause Solution Trouble ShootingDescription Parts and AccessoriesPost APR Accent InsertExploded View Exploded View Surround Panels AccentPainted Trim Brass TrimTo the Dealer WarrantyAccent 25 BV Installation Data Sheet

25BV specifications

The Enviro 25BV is an innovative, cutting-edge solution designed for those looking to enhance energy efficiency and promote a more sustainable living environment. This versatile product is a perfect fit for both residential and commercial applications, allowing users to seamlessly integrate advanced technology into their daily lives.

One of the main features of the Enviro 25BV is its state-of-the-art energy management system. This system maximizes energy usage, ensuring that resources are utilized optimally. The smart algorithms employed by the Enviro 25BV analyze real-time data and adjust settings automatically to maintain ideal conditions, which translates to significant energy savings over time.

Another standout characteristic of the Enviro 25BV is its robust build quality. Crafted with environmentally friendly materials, the design not only prioritizes sustainability but also guarantees longevity. This durability ensures that the unit can withstand various environmental elements, further enhancing its practical applications in different settings.

The Enviro 25BV incorporates advanced filtration technologies that significantly improve indoor air quality. Equipped with a multi-stage filtration system, it effectively captures dust, allergens, and other pollutants, providing a cleaner and healthier living environment. This is particularly beneficial for individuals with respiratory issues or allergies.

Moreover, the user interface of the Enviro 25BV is designed with convenience in mind. Its intuitive controls allow users to easily adjust settings and monitor energy consumption. Additionally, compatibility with smart home systems means that users can control the unit remotely, offering an exceptional level of convenience and accessibility.

In terms of energy efficiency ratings, the Enviro 25BV exceeds industry standards, making it an ideal choice for eco-conscious consumers. Its low energy consumption not only contributes to reduced utility bills but also diminishes the overall carbon footprint, aligning with global sustainability goals.

To sum up, the Enviro 25BV stands out as a premium option that combines innovative technology with eco-friendly design. With features like an advanced energy management system, robust filtration capabilities, and user-friendly controls, it represents a substantial step forward in energy-efficient solutions. Embracing the Enviro 25BV means choosing a sustainable lifestyle that benefits both individuals and the planet.
Top Page Image Contents