Enviro 25BV Never USE AN Open Flame for Leak Testing, Natural Propane Main Burner Orifice

Page 9

6. GAS LINE CONNECTIONS and TESTING

WARNING: Only persons licensed to work with gas piping may make the necessary gas connections to this appliance.

GAS LINE CONNECTION

•This stove is equipped with a 3/8 x 3 inch black iron nipple located on the right side of the unit terminating in a 3/8" male NPT fitting. Consult your local authorities codes or the CAN/CGA B 149 (1 or 2) installation code in Canada, or in the USA gas installations follow either local codes or the current edition of the National Fuel Gas Code ANSI Z223.1.

•The efficiency rating of this appliance is a product thermal efficiency rating determined under continuous operating conditions and was determined independently of any installed system.

The appliance and its shutoff valves must be disconnected from the gas supply piping system during any pressure testing where the pressure exceeds 1/2 PSIG (3.45 kpa) or damage will occur to the valve.

The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

Always check for gas leaks with a soap and water solution after completing the required pressure test.

TO TEST VALVE PRESSURES

The pressure taps are located on the left side of the valve

•Turn set screw 1 turn counter clockwise to loosen,.

•Place 5/16" (8 mm) I.D. hose over pressure tap system.

•Check pressures using a manometer.

•When finished, release pressure, remove hose & tighten set screw.

Pilot Adjustment Screw

Gas Control Knob

Hi Low Knob

3/8” Pipe

Manifold Pressure Tap

Inlet Pressure Tap

ORIFICE SIZES, PRESSURES AND BTU'S

All models are equipped with a variable output gas control.

 

NATURAL

PROPANE

MAIN BURNER ORIFICE:

#42 DMS

#53 DMS

Manifold Press:

3.8"wc / 0.95 kpa

11.0"wc / 2.74 kpa

Min. Manifold Press:

1.1"wc / 0.27 kpa

2.7"wc / 0.67 kpa

Max. Supply Press:

7.0"wc / 1.74 kpa

12.0"wc/ 2.98 kpa

Min. Supply Press:

5.0"wc / 1.25 kpa

11.5"wc / 2.86 kpa

Max. BTUH Input:

25,000 btu/h/ 7.32 Kw

25,000 btu/h/ 7.32 Kw

Min. BTUH Input:

12,500 btu/h/ 3.66 Kw

12,500 btu/h/ 3.66 Kw

Output

Fan on 18,875 btu/h/ 5.53kw

Fan on, 19,250 btu/h/ 5.64kw

 

Fan off 18,000 btu/h/ 5.27 kw

Fan off 18375 btu/h/ 5.38kw

NEVER USE AN OPEN FLAME FOR LEAK TESTING

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents What to do if YOU Smell GAS For Your SafetySafety Precautions For Your SafetyGeneral Table of Contents Codes and Approvals Replacement Parts IncludeAutomatic Flue GAS Spill Switch Dimensions and Clearances to CombustiblesOther Dimensions VentingVenting Fireplace Inserts Preparation for InstallationAssembling and Installing Your Envirogas Accent Assembly and Installation InstructionsElectrical Requirements Installing Remote Thermostat or Wall SwitchNatural Propane Main Burner Orifice Never USE AN Open Flame for Leak TestingInstallation of LOGS, Embers and Brick Panels Operating Instructions For Your Safety Read Before OperatingLighting Instructions What to do if YOU Smell GASCleaning the Inside of the Firebox Cleaning the GlassAdjusting Venturi AIR Settings Opening the DoorNatural GAS Fuel ConversionProblem Possible Cause Solution Trouble ShootingDescription Parts and AccessoriesAccent Insert Post APRExploded View Exploded View Surround Panels AccentPainted Trim Brass TrimTo the Dealer WarrantyAccent 25 BV Installation Data Sheet

25BV specifications

The Enviro 25BV is an innovative, cutting-edge solution designed for those looking to enhance energy efficiency and promote a more sustainable living environment. This versatile product is a perfect fit for both residential and commercial applications, allowing users to seamlessly integrate advanced technology into their daily lives.

One of the main features of the Enviro 25BV is its state-of-the-art energy management system. This system maximizes energy usage, ensuring that resources are utilized optimally. The smart algorithms employed by the Enviro 25BV analyze real-time data and adjust settings automatically to maintain ideal conditions, which translates to significant energy savings over time.

Another standout characteristic of the Enviro 25BV is its robust build quality. Crafted with environmentally friendly materials, the design not only prioritizes sustainability but also guarantees longevity. This durability ensures that the unit can withstand various environmental elements, further enhancing its practical applications in different settings.

The Enviro 25BV incorporates advanced filtration technologies that significantly improve indoor air quality. Equipped with a multi-stage filtration system, it effectively captures dust, allergens, and other pollutants, providing a cleaner and healthier living environment. This is particularly beneficial for individuals with respiratory issues or allergies.

Moreover, the user interface of the Enviro 25BV is designed with convenience in mind. Its intuitive controls allow users to easily adjust settings and monitor energy consumption. Additionally, compatibility with smart home systems means that users can control the unit remotely, offering an exceptional level of convenience and accessibility.

In terms of energy efficiency ratings, the Enviro 25BV exceeds industry standards, making it an ideal choice for eco-conscious consumers. Its low energy consumption not only contributes to reduced utility bills but also diminishes the overall carbon footprint, aligning with global sustainability goals.

To sum up, the Enviro 25BV stands out as a premium option that combines innovative technology with eco-friendly design. With features like an advanced energy management system, robust filtration capabilities, and user-friendly controls, it represents a substantial step forward in energy-efficient solutions. Embracing the Enviro 25BV means choosing a sustainable lifestyle that benefits both individuals and the planet.
Top Page Image Contents