Optional Outside air Kit Model ak-4 | Desa GL36CRP, GL36CLP specs

Fireplace

Installation

Continued

Optional Outside air Kit (Model ak-4)

The installation of an outside air kit should be completed during the rough framing of the fire- place due to the nature of it's location. Outside combustion air is accessed through a vented crawl space.

CAUTION: Air inlet ducts must not be terminated in an attic space.

Avoid installing outside air eyebrow in areas where inlet opening may be blocked by snow, bushes or other obstacles (see Figure 10).

The maximum height for the air inlet termination cannot exceed 3 feet below the B-vent termination

CAUTION: Do not connect the remote wall switch to a regular 120v power source! Gas valve will be damaged beyond repair.

Connect 18 ga. wires from wall switch to gas control valve terminals marked TH and TPTH or to ignition module using pigtails and wire nut connectors supplied with appliance.

Note: If any of the original supplied wire must be replaced, use type 18 AWG-105 C (25 ft. maxi- mum length) or equivalent only.

CAUTION: Due to high tem- peratures, make sure wires are not touching upper firebox.

Wall Switch

exhaust height.

To Thermopile

(Supplied)

Secure to Collars with Duct Tape or Screws

	Air Inlet
	Location
	Must Allow
	For Bushes
	or Snow
		Air Inlet
		Eyebrow
	Vented Crawl Space	Vent Hood
		Required for
	(Check Local Codes
		Wall Installation
	Before Installing in a

	Vented Crawl Space)

Figure 10 - Outside Air Kit

Wall Switch Installation

The electronic version uses a 24 VAC current sup- plied from a transformer mounted on the ignition module and is prewired for easy connection to a wall switch. The millivolt version uses a self-gen- erated millivolt current that allows you to activate the gas control valve directly without the use of normal household electricity. Both versions are supplied with a wall switch kit for ready connec- tion and mounting.

	PILOT
	ON
LO	7	TH
P	7	TH
I
	FFO
		TP
		TPTH

Back View

Route Millivolt Wires

(Supplied) Through

Electrical Conduit Bushing

Figure 11 - Wall Switch Installation

GAS SUPPLY TESTING

Note: This section is intended as a guide for quali- fied technicians installing gas to this appliance.

CAUTION: Do not connect appliance before pressure test- ing gas piping. Damage to gas valve may result and an unsafe condition may be caused.

The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa).

The appliance must be isolated from the gas sup- ply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

www.desatech.com112301-01D

GL36CRP, GL36CL, GL36CR, GL36CLP specifications

The Desa GL36CL, GL36CRP, GL36CLP, and GL36CR are innovative models in the field of space heating and fireplace technology. These units are designed to provide warmth and ambiance while ensuring energy efficiency and modern aesthetics.

The GL36CL model is characterized by its clean lines and contemporary design, making it an excellent choice for urban environments. Engineered with advanced gas-burning technology, it provides a powerful heating output while minimizing emissions, offering an eco-friendly solution for home heating. The unit features a sleek glass front that enhances the viewing experience of the flames, creating an inviting atmosphere in any room.

The GL36CRP model, on the other hand, is built with versatility in mind. Its ceramic log set is designed to replicate the look of real wood burning, offering an authentic fireplace ambiance without the hassle of traditional wood burning. The adjustable flame height settings allow users to customize their heating needs and visual appeal. Additionally, the remote control feature enables convenient operation, making it easy to adjust the settings from anywhere in the room.

Next, the GL36CLP model combines modern technology with user-friendly features. It is equipped with a built-in thermostat and programmable timer, allowing homeowners to set their heating schedule according to their preferences. This ensures optimal comfort while saving on energy costs. The glass front also contributes to enhanced safety, preventing accidental contact with the flames while providing a clear view of the flickering fire.

Lastly, the GL36CR model emphasizes efficiency and reliability. Its high-efficiency rating ensures that it effectively converts gas into heat, resulting in reduced energy consumption. This model is compatible with various home decor styles, thanks to its customizable finishing options. The easy installation process further adds to its appeal, allowing for quick setup in any residential space.

In summary, the Desa GL36 series models—GL36CL, GL36CRP, GL36CLP, and GL36CR—are exceptional choices for anyone looking to enhance their home's heating system. With a combination of advanced technology, energy efficiency, and stylish designs, these models cater to a variety of needs and preferences, making them ideal for contemporary living spaces.