Vermont Casting 8000, 6000 owner manual Assembly Attach the Side Tables

Page 14

Assembly Step 4 - Attach the Side Tables

Tools Needed:

3/8”

wrench

USE HARDWARE BAG C :

1/4-20 hex

nut (8)

LOCATE THESE PARTS:

1/4-20 x 3/4”

bolt (8)

7/16”

wrench

side table (2)

1.Insert the 3/4” bolts through the holes in the support brackets of the side table.

2.Attach the side table to the four holes located in the side of the grill bottom using the locking hex nuts provided.

3.Attach the opposite side table the same way.

14

Image 14

Contents Portable Gas Grill FormerlyNowFormerly Now Statement of CommitmentTable of Contents 6000, 8000 Series Gas Grill Portable L.P. Gas Barbecue Grills Fuel Regulator and Hose Transporting a Full Cylinder Take These Instructions to the L.P. Gas Dealer Filling and Purging Type 1 L.P. GAS CylindersAssembly Instructions Chapter Assembly Identifying the Grill Parts Locate these partsAssembly Attach the Base to the Pillar Tools NeededAssembly Attach Grill Bottom to Pillar Grill bottom Assembly Heat Shield Back side of grillAssembly Step Assembly Attach the Side Tables Assembly Assemble the Grill Lid USE Hardware BAG DAssembly Step Assembly Installing the Internal Grill Parts No Tools are NeededSet the warming rack onto the back of the cooking grids Installing an L.P. Gas Cylinder Connecting the L.P. Gas Cylinder Connecting the Regulator to CylinderNatural Gas Grills Connecting to Natural Gas For specially equipped natural gas grills onlyOperating the QUICK-CONNECT 6000, 8000 Series Replacement Parts Parts EnclosedModel 6000 Series Components Series PartsModel 8000 Series Components