Vermont Casting 8000, 6000 owner manual Assembly Attach Grill Bottom to Pillar

Page 12

Assembly Step 3 - Attach Grill Bottom to Pillar

Tools Needed:

3/8”

wrench

7/16”

wrench

USE HARDWARE BAG B :

1/4-20 nut (4)

1/4-20 x 1”

bolt (4)

LOCATE THESE PARTS:

grill bottom

assembly (1)

heat

shield (1)

back side of grill

1.Working from the back (open) side of the pillar, set the heat shield on top of the pillar.

2.Set the grill bottom on top of the heat shield. Line up the burner tubes with the control valve orifices inside the pillar. Adjust the grill bottom and heat shield to line up the bolt holes.

3.Insert the bolts through the grill bottom and tighten the nuts from inside the pillar.

12

Image 12

Contents Portable Gas Grill FormerlyNowFormerly Now Statement of CommitmentTable of Contents 6000, 8000 Series Gas Grill Portable L.P. Gas Barbecue Grills Fuel Regulator and Hose Transporting a Full Cylinder Take These Instructions to the L.P. Gas Dealer Filling and Purging Type 1 L.P. GAS CylindersAssembly Instructions Chapter Assembly Identifying the Grill Parts Locate these partsAssembly Attach the Base to the Pillar Tools NeededAssembly Attach Grill Bottom to Pillar Grill bottom Assembly Heat Shield Back side of grillAssembly Step Assembly Attach the Side Tables Assembly Assemble the Grill Lid USE Hardware BAG DAssembly Step Assembly Installing the Internal Grill Parts No Tools are NeededSet the warming rack onto the back of the cooking grids Installing an L.P. Gas Cylinder Connecting the L.P. Gas Cylinder Connecting the Regulator to CylinderNatural Gas Grills Connecting to Natural Gas For specially equipped natural gas grills onlyOperating the QUICK-CONNECT 6000, 8000 Series Replacement Parts Parts EnclosedModel 6000 Series Components Series PartsModel 8000 Series Components