Vermont Casting 6100 owner manual Assembly Attach the Base to the Pillar, Tools Needed

Page 10

Assembly Step 2 - Attach the Base to the Pillar

Tools Needed:	locking
	caster

3/8”

wrench

7/16”

wrench

back side of base,

upside down

USE HARDWARE BAG A :

1/4-20 hex

nut (4)

1/4-20 x 3/4”

bolt (4)

LOCATE THESE PARTS:

pillar

assembly (1)

base assembly (1)

locking casters

back side of pillar,

upside down

1.Lock the pre-assembled casters on base by pushing down on the latch.

2.Set the pillar upside down.

3.Set the base upside down onto the pillar bottom as shown, aligning the holes in the base with holes in the pillar.

4.Insert the four bolts through the holes in the pillar and base. Thread the locking hex nuts onto bolts. Tighten the bolts and nuts with the wrenches.

5.Carefully turn the assembly upright onto the casters.

11

Image 10

Contents Great Outdoors Table of Contents 6000,7000,8000 Series Gas Grill Portable L.P. Gas Barbecue Grills Fuel Regulator and Hose Transporting a Full Cylinder Example a Filling a Type 1 Cylinder Valve Take These Instructions to the L.P. Gas DealerFilling and Purging Type 1 L.P. GAS Cylinders Example BUnpacking the Grill Parts Tools needed to assemble grillGetting Started Liquid Propane ModelsAssembly Identifying the Grill Parts Locate these partsAssembly Attach the Base to the Pillar Tools NeededAssembly Attach Grill Bottom to Pillar Grill bottom Assembly Heat Shield Back side of grillAssembly Step Assembly Attach the Side Tables Side Burner Installation Only for grills equipped with a side burnerPhillips head screwdriver Valve orifice properly Seated into burner tube Assembly Assemble the Grill Lid USE Hardware BAG DAssembly Step Assembly Installing the Internal Grill Parts No Tools are NeededSet the warming rack onto the back of the cooking grids Installing an L.P. Gas Cylinder Connecting the L.P. Gas Cylinder Connecting the Regulator to CylinderSide Burner Option L.P. Gas Only Natural Gas Grills Connecting to Natural Gas Installation for Natural GASTo Disconnect the Fuel Supply Operating the QUICK-CONNECTLeak Test Connections Use and Care Directions Chapter Leak Testing How to Check the Fuel Supply System for Gas LeaksIgniter Lighting System Lighting InstructionsLighting Instructions Match Lighting HOW to Shut OFF the GrillLocating the Match Lighting Hole 6000,7000,8000 Series Replacement Parts Base Assembly Bottom / Burner AssemblyPillar Assembly Model 6100 Series ComponentsSideburner Components Right Side Table AssemblyLeft Side Table Assembly Variable Components