Side Burner Installation - Continued
Only for grills equipped with a side burner
igniter electrode has
been omitted for clarity
7.Insert the knob stem through the mounting hole in the control panel from the back side.
valve orifice properly
seated into burner tube
8.Insert the orifice end of the control valve into the burner tube.
IMPORTANT: The valve orifice must seat properly into the burner tube.
9.Replace and tighten the screws that secure the brass burner.
10.Insert and tighten the screws through the front of the control panel to secure the control valve.
11.Attach the burner control knob.
17