Infrared Rotisserie Burner

Cleaning and Maintenance

Special care is not required for the infrared rotisserie burner. It is designed as a self-contained unit. Do not attempt to clean it. Its own operation burns off any impurities which may condense on it.

Individual part cleaning chart

Part	What to use	How to clean
Part	What to use	How to clean

Stainless steel*	Mild detergent and warm	Wipe with soft cloth or
	water or stainless steel	sponge. Use stainless steel
	cleaner	cleaner to remove fingerprints
		and smudges. Rinse and dry
		thoroughly.

Porcelain parts	Mild detergent and warm	Wipe with soft cloth or
(Grates)	water or nonabrasive	sponge. Rinse and dry
	household cleaners.	thoroughly. For stubborn
		spots, occasionally use a
		non-caustic oven cleaner
		(fume free).
Briqette Trays	Mild detergent and	Soak in warm water and mild
	warm water	detergent. For stubborn
		spots, scrub with stainless or
		brass bristle BBQ brush. Wipe
		down with heavy-duty cloth or
		sponge. Dry thoroughly.

Control knobs	Mild detergent and	Wipe with soft cloth or
	warm water or	sponge. Rinse and dry
	nonabrasive household	thoroughly.
	cleaners. Do not soak.
Painted parts	Mild detergent and warm	Wipe with soft cloth or
(Canopy)	water or nonabrasive	sponge. Rinse and dry
	household cleaners	thoroughly.

Product Care

Cleaning and Maintenance

Battery Replacement (100 Series only)

The grill is equipped with a battery for the electronic ignition.

The battery location is shown on the control panel.

To replace the battery:

1.Slide out drip tray.

2.Locate round black cap, which is inside the burner box under the battery symbol on the control panel.

3.Unscrew cap. Battery is snapped in the cap.

4.Replace the battery by connecting corresponding post to post inside burner box.

5.Snap cap on battery and screw back into slot underneath control panel.

BatteryBattery

Battery cap

Note: Round black cap that holds battery is located underneath control panel and behind drip tray.

Cleaning and Maintenance