Meco 7710S8.641, 7710.8.641 Assemble Side Tables, Install Privacy Panel, Steel Fabric Version

STEP 14 - Assemble Side Tables

•Slide 8 side table spacers onto 8 M6 x 45 mm screws.

•Insert M6 x 45mm screws and side table spacers through bottom holes of side table and through leg. Secure with M6 nuts and tighten.

•Insert M6 x 45mm screws and side table spacers through top holes of leg. Secure with M6 nut and tighten.

•Repeat for other side table.

Note: The side table folds for storage. Make sure side table is secure when locked in the user position.

To lower side table simply grasp the front and rear of the side table, lift upward and pull slightly away from the grill. The table can then be pivoted down until it con- tacts the cart legs. Reverse the process to begin using the side table.

Step 15 - Install Privacy Panel

		Screw
	Screw
	M6 x 15	ST 4.0 x 10mm
1 pc installed		5 pcs
	in Step 1

•Attach privacy panel to back side of front legs using 1 M6 x 15mm screw on the upper left (pre-installed in Step 1 and also secures the Cylinder Slide Bracket. See inset appropriate to your privacy panel material.) Secure the remainder of the privacy panel using 5 ST 4.0 x 10mm screws in the remaining holes.

Screw	Table
M6 x 45mm	Spacer
8 pcs	8 pcs

Nut M6 8 pcs

Steel	Fabric
Version	Version

13