SIDE BURNER HOSE ASSEMBLY
•Position hose into end of side burner venturi tube until groves line up (A). Snap clip into the groove on side burner tube to secure parts (B).
•Check hose to ensure it is securely positioned in tube end.
•Attach side burner Ignitor wire to terminal on side burner bracket. Ensure you read and understand warning below before proceeding.
!
WARNING
CAUTION: NEVER LIGHT THE SIDE BURNER WHILE THE SIDE BURNER LID IS DOWN. THE SIDE BURNER LID SHOULD ALWAYS BE OPEN WHILE SIDE BURNER IS LIT. FAILURE TO DO SO MAY CAUSE SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE.
Electrode
(A)(B)
Grooves
Ignitor Wire
FIG.9
25