Char-Broil 463250211 manual Nut Cap

Page 18

Inside of cart, insert rear tabs(w/o holes) of tank heat shield into slots on the bottom of upper back panel. Attach front tabs(w/ holes) of tank heat shield under front brace using two #8x3/8” self-tapping screws.

Front brace

#8x3/8” self-tapping screw

Tank heat shield

Insert tabs into slots

10 Release the cap and nut from electronic ignition module. Attach electronic ignition module to the cart left side panel with the nut and cap.

Nut

	Cap	Electronic
	Cap	ignition module
		ignition module

Image 18

Contents Estimated assembly time 30-40 minutes Date PurchasedTable of Contents This Grill is for Outdoor USE onlyInstallation Safety Precautions California PropositionUSE and Care LP Liquefied Petroleum GasLP Cylinder Filling For your safety UseDo not household cleaning agents. Damage to gasLP Cylinder Leak Test Leak Testing Valves, Hose and Regulator Connection, do not use this regulatorTurn all grill control knobs to OFF For Safe Use of Your Grill and to Avoid Serious Injury Main Burner Ignitor LightingSideburner Match Lighting General Grill CleaningSideburner Ignitor Lighting Burner Flame CheckCleaning the Burner Assembly Storing Your GrillLimited Warranty Items Manufacturer will not PAY forParts List Key Qty DescriptionParts Diagram Assembly FrontUpper back panel Front Brace Foldable side shelf Flange into bracket Nut Cap Door Trough Replace the cap Troubleshooting Emergencies Possible Cause Prevention/SolutionAUTO-CLEAN Troubleshooting Electronic Ignition SectionPage Page Warranty Registration Department Box Columbus, GA