Char-Broil 463250211 manual Front, Assembly

ASSEMBLY

1

Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.

Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front. After all 4 casters are secure remove the Bent U Pin and save for future maintenance.

Non-lock caster

Locking caster

Front

Bottom shelf

Rear

A

Bent U pin

2	Attach side panels to bottom shelf using three
	1/4-20x1/2”screws per panel.	1/4-20x1/2” screw
	IMPORTANT: Panel with magnet must
	be on left side of bottom	shelf.

Left side panel (with a hole)

Magnet

Make sure side panels are pushed as far to the

rear of bottom shelf as

possible before fully tightening screws.

Right side panel

Front

13