Char-Broil 463271108 manual Front brace

12

Under sideburner shelf, attach sideburner ignitor wire to electrode (A).

Place burner cap onto sideburner(B). Attach sideburner cap clip (C). Place sideburner cooking grate onto sideburner shelf, aligning grate legs with holes in shelf.

A Sideburner cooking grate

Sideburner cap clip

Sideburner Ignitor Wire

Burner cap

C

Sideburner cap clip

B

13

First, attach tank heat shield and shield extension together with two #8-32x3/8”screws, 4mm flat washers, 4mm lock washers and #8-32hex nuts. Inside of cart, insert rear shield tabs into two left slots between upper and lower back panels. Attach left and center front shield tabs under front brace with #8x3/8” self-tapping screws. Insert left and right grease tray rails into slots beneath grease tray opening in upper back panel. Attach left rail to brace, with a #8x3/8” self-tapping screw. Attach right rail and right front shield extension tab together under front brace with a #8x3/8” self-tapping screw.

#8-32x3/8” Screw

Tank heat shield

Some components not shown for illustration purposes.

Tank heat shield extension

4mm Flat washer

4mm Lock washer

#8-32 Hex nut

Front brace

Grease tray opening

Front of shield - three tabs.

#8x3/8” self-	Left grease	Right grease
tapping screw	tray rail	tray rail

463271108 • 19