Jackson JG4, JG3 owner manual Safety, Installation, Electrical Caution

Page 3

SAFETY

Your new Jackson Grill barbeque is a safe, convenient appliance when used and maintained properly. As with all gas-fired appliances, certain safety precautions must be observed. Failure to follow these precautions may result in damage or injury. If you have any questions or concerns regarding the assembly or operation of this appliance, you should contact your dealer, gas appliance technician or your gas company.

NEVER OPERATE THIS BBQ WITHOUT THE PULL OUT MAIN DRIP TRAY IN PLACE.

FOR YOUR SAFETY

If you smell gas:

1.Shut off gas to the appliance.

2.Extinguish any open flame.

3.Open lid.

4.If odor continues, immediately call your supplier or fire department.

DO NOT store or use gasoline or any other flammable liquid in the vicinity of this or any other appliance.

An LP Cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

CAUTION

1.For outdoor use only.

2.If stored indoors, detach and leave cylinder outdoors.

3.This appliance must not be operated unattended.

4.Special care must be taken to keep small children away from heated surfaces.

ELECTRICAL CAUTION

1.If any accessory is used on this appliance with an external electrical power source, the accessory (when installed) must be electrically grounded in accordance with local codes. In the absence of local codes, the following standards apply:

(Canada) CSA C22.1 Canadian Electrical Code, and (USA) ANSI/NFPA No. 70 – Latest Edition.

2.Do not cut or remove the grounding prong from the plug.

3.Keep the electrical supply cord and fuel supply hose away from any heater surface.

INSTALLATION

In Canada, this appliance must be installed in accordance with the local code and relevant CGA standards:

CAN/CGA-B149.1 LP Gas/Propane Installation Code and latest codes where applicable.

In the USA, this appliance must be installed in accordance with the local code and relevant national code: ANSI Z223.1 – Latest Edition National Fuel Gas Code.

Image 3
Contents Models JG3 and JG4 ContentsSpecial message to our customers Safety InstallationElectrical Caution Clearances SpecificationsLP GAS Cylinder Placement LP GAS CylinderStorage HandlingIdentification OPD Equipped CylinderHose and Regulator OperationConnection Important Safety InformationConversion Leak TestGAS Line MaintenanceBurner Removal for Cleaning Helpful Hints for Cleaning Cooking GrillsMain Burner USE Main Burner LightingManual Burner Lighting Main Burner Rear Burner Lighting If equippedLighting Instructions Open LIDRear Burner Lighting Problem Possible Causes Solution Trouble Shooting

JG4, JG3 specifications

The Jackson JG3 and JG4 are electric guitars that cater to musicians seeking versatility, comfort, and exceptional sound quality. Designed for both beginners and experienced players, these models highlight Jackson's commitment to quality craftsmanship and innovative technology.

The Jackson JG3 is notable for its sleek body shape, which combines aesthetic appeal with ergonomic design. Its body is constructed from a solid basswood, which offers a balanced tonal foundation and resonant sound. The JG3 features a fast-playing maple neck with a convenient compound radius fingerboard, which provides an easy transition from chords to intricate lead work. The 24 jumbo frets allow for effortless bending and a wider range of expression for soloing.

Equipped with Jackson's high-output pickups—a combination of humbucking and single-coil configurations— the JG3 delivers a wide range of tones suitable for various musical styles. Players can easily switch between bright, cutting tones for leads and warm, full-bodied tones for rhythm playing. The inclusion of a three-way toggle switch enhances tonal versatility, allowing numerous sonic possibilities depending on the player's needs.

Similarly, the Jackson JG4 builds upon the foundation set by the JG3 but introduces additional features aimed at enhancing performance. The JG4 showcases a more advanced pick-up system, featuring dual humbucking pickups that produce a powerful, high-gain sound preferred by rock and metal guitarists. The neck-through body construction provides improved sustain, resonance, and access to higher frets, making it an ideal choice for players who prioritize technical solos and complex playing styles.

Both models utilize high-quality hardware, including die-cast tuners and a synchronized tremolo system, enabling fine-tuning and vibrato effects. The JG4 offers an upgraded bridge system that improves tuning stability even during extensive play, addressing a common concern for guitarists.

In terms of aesthetics, both the JG3 and JG4 come in a variety of finishes, from classic black to vibrant colors, appealing to players looking to express their individuality.

Ultimately, the Jackson JG3 and JG4 guitars stand out in the competitive market due to their combination of innovative design, quality materials, and a wide tonal palette that appeals to musicians across genres—from rock and metal to blues and beyond. Whether for practice, live performances, or studio recording, these models remain an excellent choice for guitarists at any level.