Jackson JG3, JG4 owner manual OPD Equipped Cylinder, Hose and Regulator, Operation, Identification

Page 6

OPERATION

1.Never connect your gas grill to an LP cylinder without the regulator provided, and never to an unregulated gas supply. The gas regulator supplied with the appliance must be used.

2.Always leak test the LP gas cylinder to regulator connection when connecting the LP gas cylinder to the appliance. See “leak testing”.

3.Do not operate the appliance if the smell of LP gas is present. Extinguish all flame and determine the source of LP gas before proceeding. Do not ignite the appliance until the LP gas leak has been found and sealed.

4.Always shut off the LP gas cylinder valve when the appliance is not in use.

OPD EQUIPPED CYLINDER

Effective January 1, 1998, the standard for outdoor gas appliances, ANSI Z21.58/CAN CGA-1.6, requires that appliances are to be used with cylinders equipped with an Overfill Prevention Device (OPD).

The OPD is designed to reduce the potential for the overfilling of propane cylinders, thus reducing the possibility of relief valve discharges of raw propane.

The new OPD causes a slower purge / fill operation. Some consumers have been advised by filling stations that these cylinders are “defective”. This is not a defect. Some propane filling stations may not be aware of this new device and its effects on the purge / fill operation.

IDENTIFICATION

To identify these cylinders, the new OPD handwheel has been standardized to the shape shown.

HOSE AND REGULATOR

1.The QCC coupling contains a magnetic Flow Limiting Device which will limit the flow of gas should there be a leak between the regulator and the appliance valve. This device will activate if the cylinder valve is opened while the appliance valves are open.

Be sure the appliance valves are off before the cylinder valve is opened to prevent accidental activation.

2.The QCC coupling incorporates a heat sensitive hand wheel that will cause the back check module in the QCC cylinder valve to close when exposed to temperatures between 240 degrees and 300 degrees F. Should this occur, do not attempt to reconnect the nut. Remove the hose / regulator assembly and replace with a new one.

3.The pressure regulator is set at 11” (water column) and is for use with LP

6

Image 6
Contents Contents Models JG3 and JG4Special message to our customers Safety InstallationElectrical Caution LP GAS Cylinder SpecificationsLP GAS Cylinder Placement ClearancesHandling StorageOperation OPD Equipped CylinderHose and Regulator IdentificationImportant Safety Information ConnectionLeak Test ConversionHelpful Hints for Cleaning Cooking Grills MaintenanceBurner Removal for Cleaning GAS LineRear Burner Lighting If equipped Main Burner LightingManual Burner Lighting Main Burner Main Burner USELighting Instructions Open LIDRear Burner Lighting Trouble Shooting Problem Possible Causes Solution

JG4, JG3 specifications

The Jackson JG3 and JG4 are electric guitars that cater to musicians seeking versatility, comfort, and exceptional sound quality. Designed for both beginners and experienced players, these models highlight Jackson's commitment to quality craftsmanship and innovative technology.

The Jackson JG3 is notable for its sleek body shape, which combines aesthetic appeal with ergonomic design. Its body is constructed from a solid basswood, which offers a balanced tonal foundation and resonant sound. The JG3 features a fast-playing maple neck with a convenient compound radius fingerboard, which provides an easy transition from chords to intricate lead work. The 24 jumbo frets allow for effortless bending and a wider range of expression for soloing.

Equipped with Jackson's high-output pickups—a combination of humbucking and single-coil configurations— the JG3 delivers a wide range of tones suitable for various musical styles. Players can easily switch between bright, cutting tones for leads and warm, full-bodied tones for rhythm playing. The inclusion of a three-way toggle switch enhances tonal versatility, allowing numerous sonic possibilities depending on the player's needs.

Similarly, the Jackson JG4 builds upon the foundation set by the JG3 but introduces additional features aimed at enhancing performance. The JG4 showcases a more advanced pick-up system, featuring dual humbucking pickups that produce a powerful, high-gain sound preferred by rock and metal guitarists. The neck-through body construction provides improved sustain, resonance, and access to higher frets, making it an ideal choice for players who prioritize technical solos and complex playing styles.

Both models utilize high-quality hardware, including die-cast tuners and a synchronized tremolo system, enabling fine-tuning and vibrato effects. The JG4 offers an upgraded bridge system that improves tuning stability even during extensive play, addressing a common concern for guitarists.

In terms of aesthetics, both the JG3 and JG4 come in a variety of finishes, from classic black to vibrant colors, appealing to players looking to express their individuality.

Ultimately, the Jackson JG3 and JG4 guitars stand out in the competitive market due to their combination of innovative design, quality materials, and a wide tonal palette that appeals to musicians across genres—from rock and metal to blues and beyond. Whether for practice, live performances, or studio recording, these models remain an excellent choice for guitarists at any level.