Jackson JG4, JG3 owner manual Connection, Important Safety Information

Page 7

gas only. The hose and hose couplings comply with CGA Standard CAN 1.83. No modifications or substitutions should be attempted.

4.Protect the hose from dripping grease and do not allow the hose to touch any hot surface, including the base of the grill.

5.Inspect the seal in the QCC cylinder valve when replacing the LP gas cylinder or once per year, which ever is more frequent. Replace the seal if there is any indication of cracks, creases or abrasions.

6.Inspect the hose before each use of the appliance. If the hose is cracked, cut, damaged or abraded in any way, the appliance must not be operated.

7.For repair or replacement of hose / regulator assembly, contact your dealer or approved service center.

CONNECTION

1.Be sure the cylinder valve and appliance valves are “off”.

2.Place full LP gas cylinder on tank ring bracket.

3.Center the nipple in the cylinder valve and hold in place. Using the other hand, turn the hand wheel clockwise

until there is a positive stop. Do not use tools. Hand tighten only.

When making the connection, hold the regulator in a straight line with the cylinder valve, so as not to cross thread the connection.

4.Leak test the connection. See “leak test”.

5.Refer to lighting instructions. To avoid activating the Flow Limiting Device when lighting, open the cylinder valve slowly with the appliance valves off. If the Flow Limiting Device is accidentally activated, turn off cylinder valve and appliance valves, wait 10 seconds to allow the device to reset, open cylinder valve slowly, then open the appliance valve.

IMPORTANT SAFETY INFORMATION

THE PRESSURE REGULATOR AND HOSE ASSEMBLY SUPPLIED WITH THIS OUTDOOR COOKING APPLIANCE MUST BE

USED. REPLACEMENT PRESSURE REGULATORS AND HOSE ASSEMBLIES MUST BE THOSE SPECIFIED BY THE

OUTDOOR COOKING GAS MANUFACTURER.

1.Do not store a spare LP-gas cylinder under or near this appliance.

2.Never fill the cylinder beyond 80% full.

IF THE INFORMATION IN “A” AND “B” IS NOT FOLLOWED EXACTLY, A FIRE CAUSING DEATH OR SERIOUS INJURY MAY OCCUR.

7

Image 7
Contents Models JG3 and JG4 ContentsSpecial message to our customers Installation SafetyElectrical Caution Clearances SpecificationsLP GAS Cylinder Placement LP GAS CylinderStorage HandlingIdentification OPD Equipped CylinderHose and Regulator OperationConnection Important Safety InformationConversion Leak TestGAS Line MaintenanceBurner Removal for Cleaning Helpful Hints for Cleaning Cooking GrillsMain Burner USE Main Burner LightingManual Burner Lighting Main Burner Rear Burner Lighting If equippedOpen LID Lighting InstructionsRear Burner Lighting Problem Possible Causes Solution Trouble Shooting

JG4, JG3 specifications

The Jackson JG3 and JG4 are electric guitars that cater to musicians seeking versatility, comfort, and exceptional sound quality. Designed for both beginners and experienced players, these models highlight Jackson's commitment to quality craftsmanship and innovative technology.

The Jackson JG3 is notable for its sleek body shape, which combines aesthetic appeal with ergonomic design. Its body is constructed from a solid basswood, which offers a balanced tonal foundation and resonant sound. The JG3 features a fast-playing maple neck with a convenient compound radius fingerboard, which provides an easy transition from chords to intricate lead work. The 24 jumbo frets allow for effortless bending and a wider range of expression for soloing.

Equipped with Jackson's high-output pickups—a combination of humbucking and single-coil configurations— the JG3 delivers a wide range of tones suitable for various musical styles. Players can easily switch between bright, cutting tones for leads and warm, full-bodied tones for rhythm playing. The inclusion of a three-way toggle switch enhances tonal versatility, allowing numerous sonic possibilities depending on the player's needs.

Similarly, the Jackson JG4 builds upon the foundation set by the JG3 but introduces additional features aimed at enhancing performance. The JG4 showcases a more advanced pick-up system, featuring dual humbucking pickups that produce a powerful, high-gain sound preferred by rock and metal guitarists. The neck-through body construction provides improved sustain, resonance, and access to higher frets, making it an ideal choice for players who prioritize technical solos and complex playing styles.

Both models utilize high-quality hardware, including die-cast tuners and a synchronized tremolo system, enabling fine-tuning and vibrato effects. The JG4 offers an upgraded bridge system that improves tuning stability even during extensive play, addressing a common concern for guitarists.

In terms of aesthetics, both the JG3 and JG4 come in a variety of finishes, from classic black to vibrant colors, appealing to players looking to express their individuality.

Ultimately, the Jackson JG3 and JG4 guitars stand out in the competitive market due to their combination of innovative design, quality materials, and a wide tonal palette that appeals to musicians across genres—from rock and metal to blues and beyond. Whether for practice, live performances, or studio recording, these models remain an excellent choice for guitarists at any level.