Jackson JG3, JG4 owner manual Specifications, Clearances, LP GAS Cylinder Placement

Page 4

CLEARANCES

1.The appliance must have a minimum horizontal clearance from sides and back of unit to adjacent vertical combustible construction below and extending above the top of the unit 36 inches from sides and 36 inches from back of unit.

2.Do not locate this appliance under any overhead unprotected combustible construction.

3.This appliance is for outdoor use only. Do not operate in garage, shed, balcony or other such enclosed areas.

4.Do not restrict or obstruct the flow of combustible and ventilation air to the appliance.

5.Keep the area surrounding the appliance free of combustible materials, gasoline and all flammable liquids and vapours.

6.This appliance is not intended to be installed in or on recreational vehicles and/or boats.

LP GAS CYLINDER PLACEMENT

Cylinders must be installed according to assembly instructions. Install the gas cylinder into the tank hole inside of the Jackson Pedestal.

LP GAS CYLINDER

QCC-1 Quick Closing Coupling

Your grill is designed to be used with an LP gas cylinder equipped with the new

QCC-1 Quick Closing Coupling system. The QCC-1 system incorporates new safety features required by the Canadian Standards Steering Committee and the American National Standards Institute (ANSI).

ƒGas will not flow until a positive connection has been made.

ƒA thermal element will shut off flow of gas between 240 degrees and 300 degrees F. When activated, a flow- limiting device will limit the flow of gas to 10 cubic feet per hour.

The LP Gas Cylinder is not included with the Gas Grill. Be sure to purchase one with the QCC valve. This valve is recognized by the external threads on the inlet port of the valve. QCC equipped cylinders are available from your gas grill dealer. Any attempt to connect the regulator, by use of adapters or any other means, to any other valve could result in damage or fire, and may negate the important safety features designed into the QCC-1 system.

SPECIFICATIONS

1.All LP gas cylinders used with this appliance must be constructed and marked with the specifications for LP cylinders in accordance with the Canadian Transport Commission (CTC)

4

Image 4
Contents Contents Models JG3 and JG4Special message to our customers Installation SafetyElectrical Caution Specifications LP GAS Cylinder PlacementLP GAS Cylinder ClearancesHandling StorageOPD Equipped Cylinder Hose and RegulatorOperation IdentificationImportant Safety Information ConnectionLeak Test ConversionMaintenance Burner Removal for CleaningHelpful Hints for Cleaning Cooking Grills GAS LineMain Burner Lighting Manual Burner Lighting Main BurnerRear Burner Lighting If equipped Main Burner USEOpen LID Lighting InstructionsRear Burner Lighting Trouble Shooting Problem Possible Causes Solution

JG4, JG3 specifications

The Jackson JG3 and JG4 are electric guitars that cater to musicians seeking versatility, comfort, and exceptional sound quality. Designed for both beginners and experienced players, these models highlight Jackson's commitment to quality craftsmanship and innovative technology.

The Jackson JG3 is notable for its sleek body shape, which combines aesthetic appeal with ergonomic design. Its body is constructed from a solid basswood, which offers a balanced tonal foundation and resonant sound. The JG3 features a fast-playing maple neck with a convenient compound radius fingerboard, which provides an easy transition from chords to intricate lead work. The 24 jumbo frets allow for effortless bending and a wider range of expression for soloing.

Equipped with Jackson's high-output pickups—a combination of humbucking and single-coil configurations— the JG3 delivers a wide range of tones suitable for various musical styles. Players can easily switch between bright, cutting tones for leads and warm, full-bodied tones for rhythm playing. The inclusion of a three-way toggle switch enhances tonal versatility, allowing numerous sonic possibilities depending on the player's needs.

Similarly, the Jackson JG4 builds upon the foundation set by the JG3 but introduces additional features aimed at enhancing performance. The JG4 showcases a more advanced pick-up system, featuring dual humbucking pickups that produce a powerful, high-gain sound preferred by rock and metal guitarists. The neck-through body construction provides improved sustain, resonance, and access to higher frets, making it an ideal choice for players who prioritize technical solos and complex playing styles.

Both models utilize high-quality hardware, including die-cast tuners and a synchronized tremolo system, enabling fine-tuning and vibrato effects. The JG4 offers an upgraded bridge system that improves tuning stability even during extensive play, addressing a common concern for guitarists.

In terms of aesthetics, both the JG3 and JG4 come in a variety of finishes, from classic black to vibrant colors, appealing to players looking to express their individuality.

Ultimately, the Jackson JG3 and JG4 guitars stand out in the competitive market due to their combination of innovative design, quality materials, and a wide tonal palette that appeals to musicians across genres—from rock and metal to blues and beyond. Whether for practice, live performances, or studio recording, these models remain an excellent choice for guitarists at any level.