Outdoor Gourmet CG3023E instruction manual Transportation and Storage

Page 26

TRANSPORTATION AND STORAGE

1.Always use the Safety Cap when transporting or storing your cylinder.

2.Do not store in a building, garage, or other enclosed area.

3.Always store your cylinder outside.

4.Store out of reach of children.

5.Always transport in an upright position.

6.Do not smoke when transporting your cylinder.

Dust Cap

Regulator and LP Cylinder Connections

!CAUTION

The gas pressure regulator provided with this outdoor cooking appliance must be used. This regulator is set for an outlet pressure of 11 inches water column.

Your regulator is equipped with a Q.C.C. Type 1 quick connect system. It will not allow gas to flow until a positive seal has been made. It has a thermal element that will shut off the gas flow if the temperature reaches 240 degrees F (115 degrees C). It also has a flow-limiting device that will restrict the flow of gas to 10 cubic feet per hour (0.28 cubic meters per hour).

Before each use, check the gas hose for excessive abrasion or wear, or cuts. Replace a hose assembly showing those signs with the hose assembly specified in the parts list before using the grill.

Gas Valve Manifold

Assembly

TO CONNECT THE CYLINDER TO THE REGULATOR AND HOSE

1.Be sure the LP cylinder is “OFF” by turning the hand wheel clockwise until it stops.

2.Place the cylinder on the hook beside of body with the valve facing outward. See Assembly Instructions to secure.

3.Be sure all burner controls are turned to the “Off” position.

4.Remove the safety cap from the from the cylinder valve.

5.Center the nipple of the regulator into the cylinder valve

6.Turn the black nut clockwise until it stops. Hand Tighten Only.

Do Not Use A Wrench.

26

Image 26
Contents Assembly Instructions For Your Safety Safety Precautions Table of Contents Tools Required Parts List Page Hardware Assembly Instructions Assembly Instructions Do not Install Cylinder AT this Time Assembly Instructions Assembly Instructions Assembly Instructions Assembly Instructions Attach 2-BOLTS M6x12 B into the body of firebox Assembly Instructions Assembly Instructions Assembly Instructions Assembly Instructions Assembly Instructions Put 6-cooking grid8 into the grill body. As showen below Final Assembly GAS Grill OperationLP Cylinder Filling and Exchange LP Cylinder Leak TestTransportation and Storage To Connect the Cylinder to the Regulator and HoseLeak Testing the REGULATOR, VALVES, HOSES, and Connections For Your Safety LightingLighting the Side Burner with the Match Lighting Stick Lighting the Main Burners Using Electronic IgnitionLighting the Side Burner with Electronic Ignition Cleaning Your Grill Turning OFF Your GrillBurner Flames Cleaning the BurnersElectronic Ignition Maintenance AlwaysGrilling Tips and Tricks Direct VS. Indirect CookingSide Burner Irregular Flame or Yellow Flame Food SafetyBurner will not Light Sudden Drop in GAS Pressure or Flames Blow OUTExcessive FLARE-UPS Fire Behind Control PanelCharcoal Section and Smoker Adding Charcoal/Wood During Cooking AFTER-USE Safety Frequently Asked Questions