Outdoor Gourmet CG3023E instruction manual AFTER-USE Safety

Page 37

AFTER-USE SAFETY

WARNING

Always allow grill and all components to cool completely before handling.

Never leave coals and ashes in grill unattended. Make sure coals and ashes are completely extinguished before removing.

Before grill can be left unattended, remaining coals and ashes must be removed from grill. Use caution to protect yourself and property. Place remaining coals and ashes in a non-combustible metal container and completely saturate with water. Allow coals and water to remain in metal container 24 hours prior to disposing.

Extinguished coals and ashes should be placed a safe distance from all structures and combustible materials.

With a garden hose, completely wet surface beneath and around the grill to extinguish any ashes, coals or embers which may have fallen during the cooking or cleaning process.

Cover and store grill in a protected area away from children and pets.

Proper Care & Maintenance

Cure your grill periodically throughout the year to protect against excessive rust.

To protect your grill from excessive rust, the unit must be properly cured and covered at all times when not in use.

Wash cooking grills and charcoal grates with hot, soapy water, rinse well and dry. Lightly coat grills with vegetable oil or vegetable oil spray.

Clean inside and outside of grill by wiping off with a damp cloth. Apply a light coat of vegetable oil or vegetable oil spray to the interior surface to prevent rusting. Do not coat charcoal grates or charcoal ash tray.

If rust appears on the exterior surface of your grill, clean and buff the affected area with steel wool or fine grit emery cloth. Touch-up with a good quality high-temperature resistant paint.

Never apply paint to the interior surface. Rust spots on the interior surface can be buffed, cleaned, and then lightly coated with vegetable oil or vegetable oil spray to minimize rusting.

37

Image 37
Contents Assembly Instructions For Your Safety Safety Precautions Table of Contents Tools Required Parts List Page Hardware Assembly Instructions Assembly Instructions Do not Install Cylinder AT this Time Assembly Instructions Assembly Instructions Assembly Instructions Assembly Instructions Attach 2-BOLTS M6x12 B into the body of firebox Assembly Instructions Assembly Instructions Assembly Instructions Assembly Instructions Assembly Instructions Put 6-cooking grid8 into the grill body. As showen below Final Assembly Operation GAS GrillLP Cylinder Leak Test LP Cylinder Filling and ExchangeTo Connect the Cylinder to the Regulator and Hose Transportation and StorageLeak Testing the REGULATOR, VALVES, HOSES, and Connections Lighting For Your SafetyLighting the Side Burner with Electronic Ignition Lighting the Main Burners Using Electronic IgnitionLighting the Side Burner with the Match Lighting Stick Turning OFF Your Grill Cleaning Your GrillElectronic Ignition Maintenance Cleaning the BurnersBurner Flames AlwaysSide Burner Direct VS. Indirect CookingGrilling Tips and Tricks Burner will not Light Food SafetyIrregular Flame or Yellow Flame Sudden Drop in GAS Pressure or Flames Blow OUTFire Behind Control Panel Excessive FLARE-UPSCharcoal Section and Smoker Adding Charcoal/Wood During Cooking AFTER-USE Safety Frequently Asked Questions