LIGHTING THE MAIN BURNERS USING ELECTRONIC IGNITION | Main Burner | ||
1. | Open the lid. | ||
| |||
2. | Ensure all burner control knobs are in the “Off” position. |
| |
3. | Turn on the LP gas by turning the hand wheel on the cylinder valve. |
| |
4. Turn one burner control knob marked with an igniter flame “
” to “High”.
5. Depress the electronic ignition button and hold down. You should hear a clicking sound, which shows the electronic ignition is working.
6.If the burner does not light within 5 seconds, turn the burner control knob to “Off”. Wait 5 minutes for the gas to clear, and repeat the above procedure. Use the Manual directions if it still will not light.
7.When lit, turn the control knob to the desired setting.
8.Your grill is equipped with continuous ignition. Simply turn the control knob of the burner next to the lit burner to HI. It will light automatically. Do not press the electronic ignition button again. Then adjust control knob(s) to desired settings.
MANUALLY LIGHTING THE MAIN BURNERS WITH THE MATCH LIGHTING STICK
1.Open the lid.
2.Ensure all burners are in the “Off” position.
3.Slowly turn on the gas at the LP tank valve if it is not already on.
4.Place a match in the Match Holder. This is located in the top center drawer of the grill cabinet underneath the right main burner.
5.Use the holder to slide the lit match though the cooking grates and the front of the heat tent to the left of the burner you wish to light.
6.Press and turn the burner control knob to “HI/LIGHT”. Continue to push in and hold up to 5 seconds or until the burner lights.
7.If the burner does not light within 5 seconds, turn the burner control knob to “Off”. Wait 5 minutes for gas to clear, and try again.
8.When lit, turn the control knob to the desired heat setting.
LIGHTING THE SIDE BURNER WITH ELECTRONIC IGNITION
1.Open the side burner cover
2.Ensure the side burner control knob is in the “Off” position, as well as any main burners not in use.
3.Turn on the LP gas if it is not already on.
4.Turn the side burner control knob to “High”.
5.Depress the electronic ignition button and hold. You should hear a clicking sound, which shows the electronic ignition is working.
6.If the burner does not light within 5 seconds, turn the burner control knob to “Off”. Wait 5 minutes for the gas to clear, and repeat the above procedure. Use the Manual directions if it still will not light.
7.When lit, turn the side burner control knob to its desired setting.
LIGHTING THE SIDE BURNER WITH THE MATCH LIGHTING STICK
1.Open the lid or side burner cover.
2.Ensure the side control knobs are in the “Off” position as well as any main burner not in use.
3.Turn on the LP gas if it is not already on.
4.Strike the match, and place near the top of the burner.
5.Turn the side burner control knob to “HIGH”.
6.If the burner does not light within 5 seconds, turn the burner
control knob to “Off”. Wait 5 minutes for the gas to clear, and try again.
7.When lit, turn the burner control knobs to their desired setting.
29