Procom PL600HYLB, PN750HYLB, PN750HYLA, PL600HYLA installation manual Installation continue

Installation continue

Check to make sure you have the correct parts before assembling.

. Logs: 5

7.Install the No.#1 log as indicated on base log .Fix the log on the bracket by the screw .

(FIG.-6).

Caution: Some of the steel edges may be sharp. Please use caution when assembling the unit.

INSTALLATION INSTRUCTIONS:

1.Remove log from inside the box. Please note each log fits the number marked on foam package.

2.Next remove campfire from box.

3.You may use bricks or blocks to create your sur- round to place your campfire on.

4.Make sure that the campfire is placed on a flat surface.

5.Check the log piece (FIG-4).

Fig.-4 Check the log piece

6.Make sure that the logs were installed correctly. (FIG.-5).(Base logs are pre-installed.)

Fig.-5 Install and check the base logs

Fig. 6 Install the LOG #1

8.Install the No.#2 log as indicated on base log. (FIG.-7).

Fig. -7install the LOG #2

9.Install the No.#3 log as indicated on the base log ( FIG.-8).

Fig. -8install the LOG #3

6