Napoleon Grills BIPT600, BIU405, BIPT750 manual BIPT450 BUILT-IN Instructions

1. BIPT450 BUILT-IN INSTRUCTIONS

N080-0213

N080-0213

N570-0026

N715-0080

N010-0568

This grill is designed for MASONRY, NON-COMBUSTIBLEenclosures only, and must be installed and serviced by a qualified installer to local codes.

1.Attach side mounting brackets to each side of the grill using #14 x 1/2" screws (n570-0026).

2.Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be applied to each wing of the rear trim.

3.Lower the unit in place, and connect the gas supply line to the fitting at the end of the manifold.

4.The entire installation must be leak tested before operating the unit.