BIU405 BUILT-IN Instructions | Napoleon Grills BIPT750, BIPT600

4. BIU405 BUILT-IN INSTRUCTIONS

N080-0215

N715-0083

N570-0026

N080-0215

23 e c-c

N080-0155

This grill is designed for MASONRY, NON-COMBUSTIBLEenclosures only, and must be installed and serviced by a qualified installer to local codes. Access must be provided in the enclosure for drip tray removal and cleaning.

1.Attach the side mounting brackets and the rear trim to the unit using #14 x 1/2” screws (n570-0026). The wings on the rear trim should be under the side mounting brackets.

2.Attach the supplied brackets flush with the front of the opening as per the dimensions in the above drawing (fasteners not in- cluded).

3.Lower the unit in place ensuring the brackets installed in the previous step engage between the control panel and the base bracket. Connect the supply line to the fitting at the end of the manifold.

4.The entire installation must be leak tested before operating the unit.