Napoleon Grills BIU405, BIPT450, BIPT750 manual BIPT600 BUILT-IN Instructions

2. BIPT600 BUILT-IN INSTRUCTIONS

N080-0213

N570-0026

N080-0213

N715-0081

N380-0009

N051-0001

N010-0569

This grill is designed for MASONRY, NON-COMBUSTIBLEenclosures only, and must be installed and serviced by a qualified installer to local codes.

1.Attach side mounting brackets to each side of the grill using #14 x 1/2" screws (n570-0026).

2.Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be applied to each wing of the rear trim.

3.Lower the unit in place, and connect the gas supply line to the fitting at the end of the manifold.

4.The entire installation must be leak tested before operating the unit.