Napoleon Grills BIPT450, BIPT600, BIU405 manual BIPT750 BUILT-IN Instructions

3. BIPT750 BUILT-IN INSTRUCTIONS

N080-0213

N715-0082

N080-0213 N570-0026

N380-0009

N051-0001

N010-0570

This grill is designed for MASONRY, NON-COMBUSTIBLEenclosures only, and must be installed and serviced by a qualified installer to local codes.

1.Attach side mounting brackets to each side of the grill using #14 x 1/2" screws (n570-0026).

2.Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be applied to each wing of the rear trim.

3.Lower the unit in place, and connect the gas supply line to the fitting at the end of the manifold.

4.The entire installation must be leak tested before operating the unit.