Napoleon Grills BIPRO 450 manual BI Accessory Drawer Instructions

Page 20

20

BI ACCESSORY DRAWER INSTRUCTIONS

1.Unpack the drawer frame assembly.

2.Remove the drawers from the enclosure by fully extending them and then lifting up to remove them from the slides.

3.Shim the opening to ensure that the enclosure fits snuggly into the opening. Ensure that the side shims are located at the same height as the enclosure mounting holes. The bottom of the opening may need to be shimmed as well to ensure that the front of the enclosure is plumb.

4.Once the enclosure is level and square, fasten into place. (Fasteners not included).

5.Re-install the drawers by tipping the back of the drawer down into the slide. Once the wheels are inserted into the slide, lower the front of the drawer until it is level, then push in. Note: if the enclosure is installed with shims that are too thick, the wheel will not engage into the slide. The shim thickness will need to be reduced.

6.Remove the protective coating from all remaining surfaces.

BI ACCESSORY DOOR INSTRUCTIONS

1. Unpack the door and frame.

a. For the curved stainless steel doors, remove the door(s) from the frame by lifting the door while holding on to the pivot rod. This will allow the pivot rod to come out of the hole on the bottom of the frame. Once the pivot is removed from the bottom hole, the entire door can be dropped and removed from the frame.

b. For the PF style stainless steel door, the door needs to be removed by loosening the center philips screw on the hinge furthest away from the door. This will allow the hinge to separate.

c. For double door kits N370-0502/N370-0503, refer to the instuctions included with the door kit.

2.Center the frame in the opening. Mark the location of the pivot holes, top and bottom. Remember on the PT600 double doors, there will be a pivot rod on both ends. The PF style doors do not have pivot rods. Once all pivot holes are marked, remove the frame and using a 3/8” drill bit, drill out the clearance holes for the pivot rod. These clearance holes should be at least 1/2” deep. After the holes are complete, you may once again center the frame in the opening. Starting with the hinged side, shim between the frame and side wall of the opening. Ensure the shims are close to the hinge on the PF style doors. When the frame side wall is plumb, fasten it to the cabinet with screws (not provided). Attach the other side of the frame in the same fashion, ensuring the frame is square.

3.Other than on the curved stainless steel double door kit, fasteners are not required on the top and bottom of the frame. The curved stainless steel double door frame must be fastened in the center both at the top and bottom.

4.Once the frame has been secured and checked for squareness, the door can be re-installed.

5.Remove the protective coating from all remaining surfaces.

www.napoleongrills.com

Image 20
Contents Bipro Conditions And Limitations Safe Operating Practices Gas Hook-Up Instructions Propane Cylinder SpecificationsGeneral Information Cylinder Size Opening a Area Opening B Area Leak Testing Instructions Lighting Instructions Remove warming rackCooking Instructions Cleaning Instructions Maintenance Instructions Adjusting the air shutterPage Troubleshooting Problem Possible Causes SolutionDuring operation Ports are clogged Record information here for easy reference Ordering Replacement PartsWarranty Information Page Tools Required for Assembly tools not included Getting StartedBUILT-IN Unit Opening Dimensions BUILT-IN Accessory Opening Dimensions PF Style Stainless Steel Door BI Accessory Drawer Instructions BIPRO450 BUILT-IN Instructions Page Leak Testing Instructions Rotisserie Kit Assembly Instruction Page Parts List DescriptionStandard Propane units only Natural gas units only Accessories & Parts Order Form

BIPRO 450 specifications

The Napoleon Grills BIPRO 450 is a standout choice for grilling enthusiasts who seek the perfect blend of style, functionality, and performance. Boasting a range of innovative technologies, this grill is designed for both novice and experienced chefs, bringing restaurant-quality grilling right to your backyard.

One of the most prominent features of the BIPRO 450 is its generous cooking area, offering an impressive 450 square inches of primary cooking space. This ample area allows you to prepare multiple dishes simultaneously, making it an exceptional option for family gatherings or outdoor parties. Moreover, the grill comes with a durable stainless steel cooking grid that not only promotes even heat distribution but is also easy to clean, ensuring hassle-free maintenance.

The Napoleon BIPRO 450 includes advanced infrared technology, which is integrated into its rear burner. This allows for high-temperature cooking and the ability to achieve perfectly seared meats. The infrared heat penetrates quickly, locking in the juices of your food and delivering outstanding flavor. Additionally, the grill is equipped with a built-in smoker box, allowing you to infuse your dishes with rich, smoky flavors, elevating your grilling experience to new heights.

Another standout aspect of the BIPRO 450 is its design. The grill features a sleek, built-in construction that can easily fit into an outdoor kitchen setup. Its elegant stainless steel finish not only offers a modern aesthetic but also ensures durability against the elements. The integrated LED controls offer stylish illumination, enabling easy monitoring of your grilling even at night.

The BIPRO 450 also excels in versatility, as it includes multiple burners with the capability to create various temperature zones. This feature allows you to cook different foods at the same time, catering to diverse tastes and preferences. Furthermore, the grill's ignition system is both reliable and easy to use, ensuring quick starts whenever you're ready to grill.

Safety is also a top priority, and the Napoleon BIPRO 450 includes heat-resistant handles and a well-insulated lid to keep grilling safe and comfortable.

In summary, the Napoleon Grills BIPRO 450 is a high-performance grill that combines advanced technology and thoughtful design. With its large cooking area, infrared capabilities, elegant appearance, and versatile functionality, it is an ideal investment for anyone looking to enhance their outdoor culinary adventures.