Before you start...
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING”. These words mean:
DANGER
You can be killed or seriously injured if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
Product Dimensions
27"
(68.6 cm)
(6.4 cm)
(49.5 cm)
35"
(88.9 cm)
(19.0 cm)
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
WARNING
Excessive Weight Hazard
Use two or more people to move serving cart.
Failure to do so can result in back or other injury.
Taking care of your Serving Cart
Wipe up any water spills on the exterior. Water can cause spots.
Stainless steel surfaces: Use any cleaner acceptable for use on stainless steel. Always rub in the direction of the manufacturer's polishing marks.
Other surfaces: Clean with warm dishwashing soap and water.
Cleaning
General Tips
IMPORTANT: Always follow label instructions on cleaning products.
For routine cleaning, wash with soap and water using a soft cloth or sponge. Rinse with clean water and dry at once with a soft,
Never use steel wool, as it will scratch the surface.
Use of the accessory cover designed for Outdoor Serving Cart will protect finish from weather.
Stainless Steel
IMPORTANT: Do not use
Cleaners should not contain chlorine. Damage may occur.
Rub in direction of grain to avoid scratching or damaging the surface.
Food spills should be cleaned as soon as possible. Spills may cause permanent discoloration.
•Use Stainless Steel Cleaner & Polish (Part #4396095). See “Requesting Assistance or Service” to order.
•Use a mild liquid detergent or all- purpose cleaner according to label instructions.
•Rinse with clean water and dry at once with soft,
•Use vinegar to remove hard water spots. Rinse with water and dry thoroughly.
•Use a glass cleaner to remove fingerprints.
Exterior
The quality of this material resists most stains and pitting, providing that the surface is kept clean and protected.
•Apply stainless steel polish to all areas before first use.
•Cleaning should always be followed by rinsing with clean warm water.
•Use a metal polish or stainless steel brightener to remove fingerprints, water spots, oxidation and food stains. Always follow the manufacturer’s directions.
•Wipe the surface completely dry with a soft cloth.