SHR Series Woodburning Fireplaces
Accessories
The following accessories for this appliance are available from your local Majestic Fireplaces distributor. Should you need additional information beyond what your distributor can furnish, contact: CFM Corporation, 410 Admiral Blvd., Mississauga, Ontario, Canada L5T 2N6 Attn: Technical Services.
CAUTION: This fireplace and chimney assembly is a highly engineered system, and, as such, must be oper- ated only with CFM Corporation approved components. If you use an unapproved component to make any modifications, you may create a possible fire hazard and will void the CFM Corporation warranty. In addi- tion, such action may void the coverage provided by the owner’s insurance.
Accessory | Description | Model No. |
|
|
|
Glass Enclosure Kit | Designed to enclose the fireplace opening | 36SHGDKDP/BB/BK/S |
| with glass doors allowing the fire to remain | 42SHGDKT/BB/BK/S |
| visible. Available in Polished, Brushed | 48SHGDKDP/BB/BK/S |
| Brass, Black and Pewter | 52SHGDK/BB/BK/S |
|
|
|
Outside Air Kit | Provides outside air for fuel conbustion |
|
| in the firebox. This accessory must be |
|
| installed before fireplace is installed. |
|
|
|
|
Hearth Extension | Located on the floor in front of fireplace | EH2416 |
| to protect the floor from heat, hot embers, |
|
| ashes, etc. |
|
|
|
|
Hearth Patching Kit | Used to patch cracks in hearth. | HPC1 |
|
|
|
Wall Shield | Used to protect walls adjacent to the fire- | SP40 |
| place. |
|
|
|
|
Firestop | Required at each floor level and attic on | FS2A (straight flue) |
| FS6A (30° inclined flue) | |
|
|
|
Chimney Support | Used to support the chimney at each 30 | 11CS (11" flue) |
| feet of vertical height above the hearth and |
|
| at every 6 feet of inclined chimney run. |
|
| Each support adds 2¹⁄₂" to chimney length. |
|
|
|
|
20001384 | 21 |