Time Services

Use this option to access another machine on the network to obtain the correct time for an individual printer or printers in a device group. HP printers do not have an internal clock to keep track of the time; therefore, they need to connect to another machine on the network to obtain the current time.

Following are steps to configure this option:

1.To specify the default values, select Use default values.

2.Enable clock drift correction: the device will check with the server periodically and update its time. This is beneficial because your device is always set to the correct time but it does cause some network traffic.

3.To specify the network time server address select Network time server address and type the IP address.

NOTE: The printer receives the time from this machine on the network. For the default value,

HP Web Jetadmin looks for another machine on the network. If another machine on the network is not found, the value appears as 0.

4.Local port to receive time from server: specify the port to use for the device to get data from the time server.

5.To specify an hour for the printer to synchronize with a machine on the network, select Synchronize time with server every and type an integer value between 1 and 168 (default is 24 hours).

NOTE: The time synchronizes with another machine on the network at the designated hourly interval and not immediately after saving. For example, if you specify 2 hours, the printer waits 2 hours after you save this configuration.

Device Configuration Options for File System

●File System External Access

●File System Password

●Secure File Erase Mode

Configuration settings for File System are used to delete files on the device’s memory.

File System External Access

This option allows you to manage the access to file systems by various printer communication languages on a device hard drive, which helps protect a device’s file system from unauthorized reading or writing of data. If you disable a printer communication language, that printer communication language cannot read or write any data to the file system on a device’s hard drive.

NOTE: All printer communication languages are enabled by default.

To configure this option, select the printer communication language or languages to enable.

File System Password

This option prevents unauthorized users from changing any file system configuration options and from performing a secure storage erase operation. The file system password must be set to perform a secure storage erase operation and to configure the secure file erase modes and the file system external access.

ENWW

Device Configuration Options for File System 401